Cart

Sale

SKU: SW9
0 out of 5
0 review(s)

AXIAL – HONCHO YELLOW BULLZEYE

R685.00 R300.00

AXIAL – HONCHO YELLOW BULLZEYE

0 out of 5
0 review(s)
R685.00 R300.00
SKU: SW11
0 out of 5
0 review(s)

AXIAL – WRAITH CORSAIR

R685.00 R300.00

AXIAL – WRAITH CORSAIR

0 out of 5
0 review(s)
R685.00 R300.00
SKU: SW15
0 out of 5
0 review(s)

AXIAL – WRAITH INTERIOR BLACK SKULLS BADGER

R555.00 R300.00
SKU: SW19
0 out of 5
0 review(s)

AXIAL – WRAITH TRUE PURPLE FIRE

R685.00 R300.00

AXIAL – WRAITH TRUE PURPLE FIRE

0 out of 5
0 review(s)
R685.00 R300.00
SKU: SW7
0 out of 5
0 review(s)

AXIAL HONCHO TRUE BLUE FIRE

R685.00 R300.00

AXIAL HONCHO TRUE BLUE FIRE

0 out of 5
0 review(s)
R685.00 R300.00

LOTS MORE HONCHO WRAPS UNDER CAR UPGRADES – CLICK ON CAR SKIN WRAPS

CHECK THEM OUT

SKU: SW10
0 out of 5
0 review(s)

AXIAL WRAITH BONEPILE

R685.00 R300.00

AXIAL WRAITH BONEPILE

0 out of 5
0 review(s)
R685.00 R300.00

LOTS MORE WRAITH WRAPS UNDER CAR UPGRADES – CLICK ON CAR SKIN WRAPS

CHECK THEM OUT

 

SKU: SW16
0 out of 5
0 review(s)

AXIAL WRAITH INTERIOR BLACK SPLATTER SKULLS

R555.00 R300.00

AXIAL WRAITH INTERIOR BLACK SPLATTER SKULLS

0 out of 5
0 review(s)
R555.00 R300.00

LOTS MORE WRAITH INTERIOR WRAPS UNDER CAR UPGRADES – CLICK ON CAR SKIN WRAPS

CHECK THEM OUT

SKU: 85089
0 out of 5
0 review(s)

Baja – ROVAN HYDRAULIC BRAKE KIT – FRONT

R1,400.00 R1,100.00

Baja – ROVAN HYDRAULIC BRAKE KIT – FRONT

0 out of 5
0 review(s)
R1,400.00 R1,100.00
Out of Stock
SKU: BETKIT
0 out of 5
0 review(s)

BETA – FPV Whoop Racing Advanced Kit 2 – FRSKY

R3,600.00 R3,000.00

BETA – FPV Whoop Racing Advanced Kit 2 – FRSKY

0 out of 5
0 review(s)
R3,600.00 R3,000.00

This one is sold as a secondhand unit – customer bought it – it was faulty – they had it for 2 days – board was faulty – our team pilot repaired the unit – board was replaced – flew it – and it is 100%

BETAFPV Advanced Kit 2 – the best RTF kit for the drone starter as well as FPV pros to practice indoor. The special design of Meteor75 Lite brushless drone, remarkable LiteRadio 2 and VR01 FPV Goggles, bring you unforgettable flight experience.

Package

SKU: BETA LITE

BETA Lite Radio V2 Remote Transmitter – MODE 2 – FRSKY

0 out of 5
0 review(s)
R1,100.00 R950.00

OUR TEST PILOT – JADON – TESTED THIS RADIO WITH THE BETA VR01 GOGGLES FOR ABOUT 4 DAYS – FROM WHOOPS TO TOOTHPICKS AND EVEN ON HIS 5 INCH RACE QUAD – HE SAYS IT IS GOOD ENOUGH TO IN FACT GO RACE WITH – VERY GOOD QUALITY AT A GOOD PRICE

After the latest round of beta test, LiteRadio 2 is back to the market with the huge improvements based on the original version. MODE 2

  • Supports Frsky protocol, easily change Frsky D8, Frsky D16 FCC and Frsky D16 LBT mode (The default version is Frsky D16 FCC)
  • Built-in charging module, support USB charging
  • Adopted the rubber coat and add weight, makes it more ergonomic
  • Add vibration motor, provide a vibrating prompt
  • Redesign the power button, make it crystal clear and better for the LED indication

Bullet Point

  • Designed for FPV racing starters, and supports Bayang protocol and Frsky protocol (D16/ D8)
  • LiteRadio 2 is powered by OpenTX firmware. Totally 8 channels and has a hobby grade gimbal.
  • This radio tansmitter acts as a USB Joystick when connected to a personal computer. So you could use it to play FPV simulator like EREADRONE
  • The trainer function is available for this LiteRadio 2 transmitter. It is useful for FPV racing student in training
  • LiteRadio 2 transmitter runs the OpenTX 2.2.4 firmware. OpenTX comes with a computer-based graphical user interface, OpenTX Companion. Pilots could use OpenTX Companion is trim the gimbal central value
  • With the hobby grade gimbal and adopted the rubber coat, makes it more ergonomic

Specification

  • Item: LiteRadio 2
  • Frequency Range: 2.4G (2403MHz-2447MHz)
  • 2.4G System: NRF24L01 or CC2500
  • Channel: 8
  • System: Bayang Protocol / Frsky Protocol
  • Power: ≤80mw
  • Model Type: Multi-rotor
  • Support USB Charging
  • Support FPV Simulator Connected
  • Output: PPM, support Student Radio Mode
  • LED Light: Green-Power On / Red-Warning / Blue-Normal
  • Battery: 350mAh 2S Battery
  • Weight: 227.4g (with battery)

 

SKU: BETA VR01
0 out of 5
0 review(s)

Beta VR01 FPV Goggles

R1,485.00 R1,300.00

Beta VR01 FPV Goggles

0 out of 5
0 review(s)
R1,485.00 R1,300.00

OUR TEST PILOT – JADON – TESTED THESE GOOGLES WITH THE BETA LIGHT RADIO FOR ABOUT 4 DAYS – FROM WHOOPS TO TOOTHPICKS AND EVEN ON HIS 5 INCH RACE QUAD – HE SAYS IT IS GOOD ENOUGH TO IN FACT GO RACE WITH – VERY GOOD QUALITY AT A GOOD PRICE

BETAFPV VR01 FPV Goggles – a First-Person-View Goggle with 4.3 inch 800*480px HD high brightness LCD which will allow you to experience a bright world without warped and blurred images. Adopt ergonomic design with a foam sponge faceplate and a three-sided adjustable headband, comfortable like as cotton and suitable for all age ranges.

  • BETAFPV VR01 FPV Goggles is with 4.3 inch 800*480px HD high brightness LCD, which is specially tuned for FPV racing or Model airplane.
  • Adopt ergonomic design with a foam sponge faceplate and a three-sided adjustable headband, this FPV Goggles fits your face and head perfectly.
  • Buit-in super sensitiveness 5.8GHz 40ch receiver,especially with RaceBand.
  • Come with advanced auto-searching function and show yout the working frequency on screen.
  • 92% transparent lens adopted ,no distort,no blur on the adage of screen.
  • Light weight 375g with 2hr 2000mAh battery, RTF for any scale, racing, Model airplane game.

BODY

  • Dimension: 155x144x113mm
  • Weight: 375g with 2hr 2000mAh battery
  • Belt: three-Ways adjustable belt

SCREEN

  • screen size: 4.3 inch
  • Screen resolution: 800*480 (No blur after enlarge by the lens)
  • Screen brightness: 300cd/m2 with special high brightness backlight LED for outdoor FPV
  • View Angle: 12 O’CLOCK

LENS

  • 2.8x boost of the video to acquire intense feel-in-there video
  • 92% transparent rate no distort of light

JACK

  • Input CVBS
  • Headphone sound output
  • TF Card(C10) Max32G
  • USB DC5V IN, the device operating current of 550mA@5V,built-in battery maximum charge current of 750mA@5V; if the device is working when charging, please pay attention to selecting the rated current greater than 2A/5V charging equipment

BATTERY

  • Built-in 3.7V/2000mAh high-capacity polymer battery, when the battery is charging, the device the red LED will light when charging is completed, here are bright green LED
  • Each full charge revive is around 2 hours working time
SKU: 85PRO
0 out of 5
0 review(s)

Beta85 Pro 2 Whoop Quadcopter (2S) XT30 – FRSKY

R2,200.00 R1,850.00

Beta85 Pro 2 Whoop Quadcopter (2S) XT30 – FRSKY

0 out of 5
0 review(s)
R2,200.00 R1,850.00

Beta85 Pro 2, a new approach to the 2S micro formula which optimizes weight. This provides a smoother flight experience that’s easier to control at high speed and easier on battery life as well. With an F4 2S AIO FC and 1103 11000Kv motors lifting only 42g plus battery, you have plenty of power to use both indoor and outdoor spaces as a small scale acro playground. The weight savings also provide a handling advantage on the race course, allowing tighter turns and making it easier to hit gates. 

Specification

SKU: AV15
0 out of 5
0 review(s)

Brother Hobby Avenger 1507 – 4100kv

R280.00 R260.00

Brother Hobby Avenger 1507 – 4100kv

0 out of 5
0 review(s)
R280.00 R260.00

The Brotherhobby Avenger 1507 Motor is perfect for 3″ and 4″ Racing Drones.

Specifications:

KV: 4100KV

Configuration: 12N14P

No.of Cells(Lipo): 3-4S (12.6 – 16.8v)

Wire AWG: 26AWG

Rotor: 1.5mm N52H (arc magnets)

Stator: 0.15mm Nippon Steel silicon steel

Motor Width: 19.6mm

Motor Height: 30.5mm

Bearings: Japanese NSK

Casing Material: Al 7075

Weight: 15.5g

SKU: R3 2207
0 out of 5
0 review(s)

BROTHER HOBBY R3 – 2207 – 1660KV

R290.00 R260.00

BROTHER HOBBY R3 – 2207 – 1660KV

0 out of 5
0 review(s)
R290.00 R260.00

SPECS

KV:1660KV

Configuration: 12N14P

No.of Cells(Lipo): 4-6S

Magnet: N52H arc magnets

Wire AWG: 20AWG
Stator:  0.15mm Kawasaki silicon steel
Bearings: Japanese NSK 8*3*4
Base casing: Al 7075
Bell cap:Al 7075

SKU: BH5
0 out of 5
0 review(s)

BROTHER HOBBY R3 – 2207 – 2400kv

R290.00 R250.00

BROTHER HOBBY R3 – 2207 – 2400kv

0 out of 5
0 review(s)
R290.00 R250.00

Returner R3-2207 Motor

KV:2400KV

Configuration: 12N14P

No.of Cells(Lipo): 4-5S
Magnet: N52H arc magnets
Wire AWG: 20AWG
Stator:  0.15mm Kawasaki silicon steel
Bearings: Japanese NSK 8*3*4
Base casing: Al 7075
Bell cap:Al 7075

SKU: BH1
0 out of 5
0 review(s)

BROTHER HOBBY R4 – 1806 – 2850KV

R240.00 R205.00

BROTHER HOBBY R4 – 1806 – 2850KV

0 out of 5
0 review(s)
R240.00 R205.00

This motor from Brother Hobby was specifically designed for light weight 4inch and 5inch machines. The “returner” series of motors are known for high quality, HIGH output power, and light weight.

The 2850KV is suggested for 4inch props. Compared to a 1407 motor these have quite a bit more torque allowing you to use heavy pitch blades. Even heavy pitch tri blades will be no problem!

Specs:

Returner 1806 R4
Configuration: 12N14P
No.of Cells(Lipo): 3-4S
Rotor: N52H arc magnets
Wire AWG: 20AWG
Shaft: Titanium Alloy hollow shaft
Stator: 0.15mm Kawasaki silicon steel
Bearings: NMB 6*3*2.5mm
Base casing: Al 7075
Bell cap: Al 7075
Weight:21g (with 16cm wire and nut)
Weight 19g (with short wires and nut)

Mounting: M3 screws on 12mm circle

On the Superlight Norris 5inch – With the higher 2850KV option on 5inch props you will have higher top speeds, but more loading on your system. We have tested the Norris on the 2850KV version with 5040 Tri Props with fantastic results, however you need to keep AUW (before lipo) to no more than 220g, and run no larger than a 1300mah lipo. The 2850KV option will run a bit on the warm side. Light weight is KEY.

SKU: BH6
0 out of 5
0 review(s)

BROTHER HOBBY R4 – 2206 – 2300kv

R350.00 R320.00

BROTHER HOBBY R4 – 2206 – 2300kv

0 out of 5
0 review(s)
R350.00 R320.00

KV:2300KV

Configuration: 12N14P

No.of Cells(Lipo): 3-5S
Magnet: N52H arc magnets
Wire AWG: 20AWG
Shaft: Titanium Alloy hollow shaft
Stator: 0.15mm Nippon Steel silicon steel
Bearings:  Japan EZO 4 x 9 x 4mm ( 684ZZ )
Base casing: Al 7075
Bell cap: Al 7075 ( Double Anodizing colors )

SKU: BH7
0 out of 5
0 review(s)

BROTHER HOBBY R4 – 2206 – 2600kv

R350.00 R320.00

BROTHER HOBBY R4 – 2206 – 2600kv

0 out of 5
0 review(s)
R350.00 R320.00

KV:2600KV

Configuration: 12N14P

No.of Cells(Lipo): 3-5S
Magnet: N52H arc magnets
Wire AWG: 20AWG
Shaft: Titanium Alloy hollow shaft
Stator: 0.15mm Nippon Steel silicon steel
Bearings:  Japan EZO 4 x 9 x 4mm ( 684ZZ )
Base casing: Al 7075
Bell cap: Al 7075 ( Double Anodizing colors )

SKU: BH4
0 out of 5
0 review(s)

BROTHER HOBBY R5 – 2207 – 2400kv

R350.00 R300.00

BROTHER HOBBY R5 – 2207 – 2400kv

0 out of 5
0 review(s)
R350.00 R300.00

Returner R5-2207 Motor

KV:2400KV
Configuration: 12N14P
No.of Cells(Lipo): 4-5S
Magnet: N52H arc magnets
Wire AWG: 20AWG
Shaft: Titanium Alloy hollow shaft
Stator: 0.15mm Nippon Steel silicon steel
Bearings:  Japan EZO  8x 4 x 3mm
Base casing: Al 7075
Bell cap: Al 7075 ( Double Anodizing colors )

SKU: BH3
0 out of 5
0 review(s)

BROTHER HOBBY R5 – 2207 – 2700kv

R350.00 R300.00

BROTHER HOBBY R5 – 2207 – 2700kv

0 out of 5
0 review(s)
R350.00 R300.00

Returner R5-2207 Motor

KV:2700KV
Configuration: 12N14P
No.of Cells(Lipo): 4-5S
Magnet: N52H arc magnets
Wire AWG: 20AWG
Shaft: Titanium Alloy hollow shaft
Stator: 0.15mm Nippon Steel silicon steel
Bearings:  Japan EZO  8x 4 x 3mm
Base casing: Al 7075
Bell cap: Al 7075 ( Double Anodizing colors )

SKU: BH16
0 out of 5
0 review(s)

BROTHER HOBBY R5 – 2306 – 2450KV – Dead Pool

R350.00 R300.00

BROTHER HOBBY R5 – 2306 – 2450KV – Dead Pool

0 out of 5
0 review(s)
R350.00 R300.00

Returner R5-2306 Motor

KV:2450KV
Configuration: 12N14P
No.of Cells(Lipo): 4-5S
Magnet: N52H arc magnets
Wire AWG: 20AWG
Shaft: Titanium Alloy hollow shaft
Stator: 0.15mm Nippon Steel silicon steel
Bearings:  Japan EZO  8x 4 x 3mm
Base casing: Al 7075
Bell cap: Al 7075 ( Double Anodizing colors )

SKU: BH
0 out of 5
0 review(s)

BROTHER HOBBY R5 – 2306 – 2450KV – Red Hulk

R350.00 R300.00

BROTHER HOBBY R5 – 2306 – 2450KV – Red Hulk

0 out of 5
0 review(s)
R350.00 R300.00

Here is motor from the masters of propulsion engineering, Brother Hobby. This is a 2306 sized motor that only weighs 28g! This is crazy light for a motor with this much power.

Specification:
Brand name: BrotherHobby
Item name: Returner R5 2306
Color: Red Hulk
KV: 2450
Configuration: 12N14P
Thread: Clockwise (CW)
Cells (LiPo): 4-5S
Rotor: N52H arc magnets
Wire AWG: 20AWG
Shaft: Titanium Alloy hollow shaft
Stator: 0.15mm Kawasaki silicon steel
Bearings: Japan NSK 8*4*3mm
Base casing: Al 7075
Bell cap: Al 7075 ( Double Anodizing colors )
Weight: about 28.3 (without wire)

Features:
-EZO 8*4*3 bearing, a new bearing with higher RPM and making the motor lighter
-5mm hollow motor shaft
-the naked base thickness is increased to be 3mm, making it highly durable in crashes

Package included:
1* BrotherHobby Returner R5 2306 2450KV Red Hulk/Deadpool motor

1* Prop Nut
4* M3 screws
SKU: BH18
0 out of 5
0 review(s)

BROTHER HOBBY R5 – 2306 – 2650KV – Dead Pool

R350.00 R300.00

BROTHER HOBBY R5 – 2306 – 2650KV – Dead Pool

0 out of 5
0 review(s)
R350.00 R300.00

Here is motor from the masters of propulsion engineering, Brother Hobby. This is a 2306 sized motor that only weighs 28g! This is crazy light for a motor with this much power.

Returner R5-2306 Motor

KV:2650KV
Configuration: 12N14P
No.of Cells(Lipo): 4-5S
Magnet: N52H arc magnets
Wire AWG: 20AWG
Shaft: Titanium Alloy hollow shaft
Stator: 0.15mm Nippon Steel silicon steel
Bearings:  Japan EZO  8x 4 x 3mm
Base casing: Al 7075
Bell cap: Al 7075 ( Double Anodizing colors )

SKU: BH19
0 out of 5
0 review(s)

BROTHER HOBBY R5 – 2306 – 2650KV – Red Hulk

R350.00 R300.00

BROTHER HOBBY R5 – 2306 – 2650KV – Red Hulk

0 out of 5
0 review(s)
R350.00 R300.00

Here is motor from the masters of propulsion engineering, Brother Hobby. This is a 2306 sized motor that only weighs 28g! This is crazy light for a motor with this much power.

Returner R5-2306 Motor

KV:2650KV
Configuration: 12N14P
No.of Cells(Lipo): 4-5S
Magnet: N52H arc magnets
Wire AWG: 20AWG
Shaft: Titanium Alloy hollow shaft
Stator: 0.15mm Nippon Steel silicon steel
Bearings:  Japan EZO  8x 4 x 3mm
Base casing: Al 7075
Bell cap: Al 7075 ( Double Anodizing colors )

SKU: BH62700
0 out of 5
0 review(s)

BROTHER HOBBY R6 – 2207 – 2700KV

R350.00 R300.00

BROTHER HOBBY R6 – 2207 – 2700KV

0 out of 5
0 review(s)
R350.00 R300.00

Always known for high quality, smooth running motors

Bigger bearing – NMB 9 x 4 x 4

Specifications:

  • KV: 2700KV
  • Configuration:12N14P
  • No. of Cells(Lipo):4-5S
  • Rotor:N52H arc Magnet
  • Stator:0.15mm Nippon steel silicon steel
  • Shaft:Titanium Alloy hollow shaft
  • Bearings:Japanese NMB 9X4X4
  • Wire AWG:20#,16cm Length
  • Bell cap:AI 7075
  • Base case:AI 7075
  • Prop Adapter shaft Thread:M5
  • Bolt Pattern:M3(16X19mm)
  • Weight:32g with 16cm SR wires
SKU: BH20

Brother Hobby R6 – 2306 – 2650KV – Saturation

0 out of 5
0 review(s)
R340.00 R300.00

This motor is based on the popular Brother Hobby “Deadpool” but given a cool psychedelic anodized color and upgraded EZO 9mm x 4mm x 4mm bearing! The motor employs all the features of the R5 Deadpool including a 5mm hollow motor shaft, quality bearing, and the naked base thickness of 3mm to increase durability.

Specifications:

Configuration: 12N14P

No.of Cells(Lipo): 4-5S

Magnet: N52H arc magnets

Wire AWG: 20AWG

Shaft: Titanium Alloy hollow shaft

Stator: 0.15mm Nippon Steel silicon steel

Bearings:  Japan NMB 9 x 4 x 4mm

Base casing: Al 7075

Bell cap: Al 7075 ( Double Anodizing colors )

Weight:28G with 3cm wires

SKU: BH17
0 out of 5
0 review(s)

Brother Hobby R6 – 2306 2450KV – Saturation

R340.00 R300.00

Brother Hobby R6 – 2306 2450KV – Saturation

0 out of 5
0 review(s)
R340.00 R300.00

This motor is based on the popular Brother Hobby “Deadpool” but given a cool psychedelic anodized color and upgraded EZO 9mm x 4mm x 4mm bearing! The motor employs all the features of the R5 Deadpool including a 5mm hollow motor shaft, quality bearing, and the naked base thickness of 3mm to increase durability.

Specifications:

KV:2450KV

Configuration: 12N14PNo.of Cells(Lipo): 4-5S

Magnet: N52H arc magnets

Wire AWG: 20AWG

Shaft: Titanium Alloy hollow shaft

Stator: 0.15mm Nippon Steel silicon steel

Bearings:  Japan NMB 9x 4 x 4mm

Base casing: Al 7075

Bell cap: Al 7075 ( Double Anodizing colors )

Weight: 28G with 3cm wires

SKU: BHSS
0 out of 5
0 review(s)

Brother Hobby Speed Shield 2207.5 2400KV

R400.00 R350.00

Brother Hobby Speed Shield 2207.5 2400KV

0 out of 5
0 review(s)
R400.00 R350.00

Brotherhobby has been able to fit a unique stator size of 2207.5 inside a rather small bell  – RESULT IS A amazingly powerful motor in a small package that only weighs 31g.

Specifications:

KV: 2400KV

Configuration:12N14P

No.of Cells(Lipo):4-6S

Rotor: N52H arc magnets

Stator:0.15mm Nippon Steel silicon steel

Shaft: Titanium Alloy hollow shaft

Bearings: Japanese NMB 9x4x4mm

Wire AWG:20AWG 16cm length

Bell cap: Al 7075

Base casing: Al 7075

Prop Adapter Shaft Thread: M5

Bolt Pattern: M3 (16X16mm)

Weight: 31g with wires

SKU: BHSV2
0 out of 5
0 review(s)

Brother Hobby Speed Shield 2207.5 2700KV V2

R400.00 R350.00

Brother Hobby Speed Shield 2207.5 2700KV V2

0 out of 5
0 review(s)
R400.00 R350.00

New style and new colours with an area for the prop to grip better on the motor.

Specifications:

KV: 2700  

Configuration:12N14P

No.of Cells(Lipo):4-6S

Rotor: N52H arc magnets

Stator:0.15mm Nippon Steel silicon steel

Shaft: Titanium Alloy hollow shaft

Bearings: Japanese NMB 9x4x4mm

Wire AWG:20AWG  16cm length

Bell cap: Al 7075

Base casing: Al 7075

Prop Adapter Shaft Thread: M5

Bolt Pattern: M3 (16X16mm)

Weight:33g with short SR wires

SKU: BHAV28065
0 out of 5
0 review(s)

BROTHERHOBBY AVENGER 2806,5 – 1300kv – 4 TO 6S

R400.00 R380.00

BROTHERHOBBY AVENGER 2806,5 – 1300kv – 4 TO 6S

0 out of 5
0 review(s)
R400.00 R380.00

Specifications

  • KV: 1300KV
  • Base casing: Al 7075
  • Stator: 0.2mm Kawasaki silicon steel
  • Configuration: 12N14P
  • Prop Adapter Shaft Thread: M5
  • Shaft: Titanium Alloy hollow shaft
  • No.of Cells(Lipo): 4-6S
  • Bolt Pattern: M3 (19X19mm)
  • Rotor: N52H arc magnets
  • Weight: 41g with short SR wires
  • Wire AWG: 18AWG 20cm length
SKU: BH1103
0 out of 5
0 review(s)

BrotherHobby R3 1103 – 8000KV

R185.00 R165.00

BrotherHobby R3 1103 – 8000KV

0 out of 5
0 review(s)
R185.00 R165.00

Specification

  • Brand Name: BrotherHobby
  • Model: Returner R3 1103
  • Item Name: 1103 8000KV, 1-2S Brushless Motor
  • Configuration: 9N12P
  • KV: 8000KV
  • No.of Cells(Lipo): 1-2S
  • Rotor: N52H arc magnets
  • Wire AWG: 30AWG
  • Stator: 0.2mm Kawasaki silicon steel
  • Bearings: Japanese NSK 4X1.5X2
  • Base casing: Al 7075
  • Bell cap: Al7075
  • Weight: 4g
SKU: DAVIN
0 out of 5
0 review(s)

DAVINCI JUNIOR 3D PRINTER

R2,999.00 R2,450.00

DAVINCI JUNIOR 3D PRINTER

0 out of 5
0 review(s)
R2,999.00 R2,450.00

DEMO MODELS – DID NOT DO MANY DEMO’S – EACH DID 3 DEMOS AT SCHOOLS – BASICALLY BRAND NEW

Don’t let its slimmer and lighter look fool you, the da Vinci Jr. has a robust build size of 150 x 150 x 150mm and a resolution of 100 to 400 microns. Its design allows for the inclusion of an auto-feeding filament system, which takes the PLA filament to the extruder, and ensures that the filament is loaded properly and is ready to print.

Contact:

Lance – 082 448 8569

SKU: 796
0 out of 5
0 review(s)

DYS SE2205 Pro CCW 2300 KV

R230.00 R200.00

DYS SE2205 Pro CCW 2300 KV

0 out of 5
0 review(s)
R230.00 R200.00

Features:

New design with imported NMB bearing

N52 magnet and 0.2mm lamination

Powerful with a 1.1kg thrust to work with BN5045 Prop

Hollow shaft with a screw to fix the shaft

Special design for the FPV racer champions.

Specifications:

KV: 2300

Configuration: NP

Stator Diameter: 22.0mm

Stator Length: 5.0mm

Shaft Diameter – 3.0mm

Motor Dimensions(Dia. x Len): Φ27.7mm × 19.0mm

Weight: 30g

No.of Cells(Lipo): 3-5S

Max Continuous current(A): 26.8A

Max Continuous Power(W): 428.8W

Internal resistance: 0.06Ω

SKU: 795
0 out of 5
0 review(s)

DYS SE2205 Pro CW 2300 KV

R230.00 R200.00

DYS SE2205 Pro CW 2300 KV

0 out of 5
0 review(s)
R230.00 R200.00

Features:

New design with imported NMB bearing

N52 magnet and 0.2mm lamination

Powerful with a 1.1kg thrust to work with BN5045 Prop

Hollow shaft with a screw to fix the shaft

Special design for the FPV racer champions.

Specifications:

KV: 2300

Configuration: NP

Stator Diameter: 22.0mm

Stator Length – 5.0mm

Shaft Diameter – 3.0mm

Motor Dimensions(Dia. x Len) – Φ27.7mm × 19.0mm

Weight: 30g

No.of Cells(Lipo): 3-5S

Max Continuous current(A): 26.8A

Max Continuous Power(W): 428.8W

Internal resistance: 0.06Ω

SKU: EDR
0 out of 5
0 review(s)

Edge Racing R2207 2580KV – Blue

R250.00 R220.00

Edge Racing R2207 2580KV – Blue

0 out of 5
0 review(s)
R250.00 R220.00

Specification:

Brand Name: Sunnysky

Model: E-R2207

Item Name: 2580KV 3-4S Brushless Motor

KV: 2580KV ( Optional)

Version: CW Screw Thread

Stator Diameter: 22mm

Stator Thickness: 7mm

No. of Stator Arms: 12

No. of Rotor Poles: 14

Rotor Diameter: 27.4mm

Body Length: 20.5mm

Max. Lipo Cell: 3-4S(2580KV)

No-Load Current: 1.6A@10V (2580KV)

Motor Resistance: 31.7mΩ (2580KV)

Max. Con. Current: 53A/10s (2580KV)

Max. Con. Power: 890W (2580KV)

Weight: 37g (2580KV)

Recommend ESC: 50A (2580KV)

Recommend Propeller: 5040 /5045 3-Blade Prop

SKU: EDGEBLU3
0 out of 5
0 review(s)

Edge Smart Drive R2305 2800KV

R250.00 R220.00

Edge Smart Drive R2305 2800KV

0 out of 5
0 review(s)
R250.00 R220.00

REMEBER VARIATION CW/CCW

Specifications:

Motor kV: 2800 – blue ccw

Max power: 900w

Thrust: 1480g

Esc: 30-40 amp

Weight: 29g

SKU: MIOSD
0 out of 5
0 review(s)

FlightOne MillivoltOSD

R975.00 R800.00

FlightOne MillivoltOSD

0 out of 5
0 review(s)
R975.00 R800.00

The FlightOne MillivoltOSD Micro flight controller is the most advanced, performance-driven, flight controller ever designed. The MillivoltOSD uses a powerful F405 MPU, accompanied by the High-Speed Invensense  20602 gyro, allows it to take full advantage of FlightOne efficient code to run at 32KHz for the best Performance possible.

Performance

The MillivoltOSD presents not only the BEST performance but also the most STABLE performance due to the amazing vibration rejection technology implemented in FlightOne. Our filters along with the integrated FlightOne Gummies, allow your quad to stay in the air no matter what! Damaged propellers caused by that insane gate clip on turn 3? Not a problem. You can still finish the race! Endless days of tuning are now a thing of the past.  Our boards come preloaded with software and defaults that should fly amazing for 99% of people.

In addition to the vibration rejection technology, the SSG (Invensense 20602) gives you the highest speeds currently possible with the lowest noise floor and highest sensitivity. The Invensense 20602 gyro has never been used in any flight controller before (except the Revolt and RevoltOSD) and gives you the fastest response time possible as if the quad can read your mind.

Software

Our flight controller comes pre-loaded with FlightOne One. The configurator and latest stable build can be downloaded from https://flightone.com/download. No drivers simply plug in the MillivoltOSD and it automatically connects to the Configurator
This is truly amazing software, which flies so well you can completely eliminate prop wash. Setup is a breeze as well, just run a couple of wizards and you will get right up into the air.

Setup Simplicity

Setting up the MillivoltOSD is easy.  The solder pin layout is easy to read with motor connections in each corner. Just solder the closest motors and the wizard handles the rest,  you can put the Revolt in upside down and backward just solder to the closest motor pad and the FlightOne wizards will handle the rest.  The MillivoltOSD also features DFU (sometimes DFU mode is required to get the latest bootloader and use software that we don’t write) free updating and a self-healing and updating bootloader, just in case something does go wrong.

Features

weight: 3.3 grams

Integrated Vibration Dampening FlightOne Gummies

Inverter for Taranis and Futaba radios

3.3v or 5.0v for Spektrum, Taranis, etc

LED Driver for WS2812b programmable LED

High-Speed 32khz gyro, lowest noise floor, and highest sensitivity gyro ever used

Through-hole solder pads – forms an I-Beam when soldered for extra strength

FrSky Taranis, Spektrum, Futaba, JR, IBus, Sbus, and other radio support

Integrated buzzer driver

Voltage and current ADC pins, for full voltage and current monitoring

Full telemetry output support

ESC flashing and configuration built into configurator

Most active software development

3.3v and 5v voltage outputs

2 serial uarts

Bluetooth expandable

F4 processor

16mb of flash memory

GPS expandable

Pins into The FlightOne Spark Micro 4in1 ESC

Dimensions: 25mm x 25mm

Mounting holes: 20mm squared to the center of holes

Out of Stock
SKU: MIX1080
0 out of 5
0 review(s)

Foxeer Mix 1080p 60fps Super WDR Mini HD Camera

R1,150.00 R800.00

Foxeer Mix 1080p 60fps Super WDR Mini HD Camera

0 out of 5
0 review(s)
R1,150.00 R800.00

The Foxeer Mix is an HD FPV camera that gives pilots the ability to fly FPV while also being able to record your flight videos in 1080p quality, all from the same camera! Pilots now have tons of options for HD FPV footage besides the typical GoPro style camera.

SKU: FNP4
0 out of 5
0 review(s)

Foxeer Nano Predator 4 – Plug Version

R780.00 R610.00

Foxeer Nano Predator 4 – Plug Version

0 out of 5
0 review(s)
R780.00 R610.00

SALE

Description:
Brand name: Foxeer
Model: Predator 4 Nano
Multi-mode: Day/Night/LED/B&W
Super-WDR
Switch shortcut
4ms low letency
14*14mm
4-25V
Low Noise
Remote control

Package Included:
1x Foxeer Predator 4 Nano Camera
1x Bracket
1x Servo cable
1x 2pin OSD cable
1x OSD Board
1x Manual
4x (M2x6) Bracket Screws
4x (M2x4) Screws
2x Case Screws

SKU: FPMV3
0 out of 5
0 review(s)

Foxeer Predator V3 Micro Camera

R665.00 R500.00

Foxeer Predator V3 Micro Camera

0 out of 5
0 review(s)
R665.00 R500.00

SALE

Specifications:

16:9/4:3 Switchable

PAL/NTSC Switchable

Super WDR Function

1000TVL

4ms Latency

Image Flip

No Jello

Defog (reduce the blur, image sharper)

OSD

5-40V input

4:3 Screen

Seven Languages

Size: 18.6x19mm, Weight: 5.7g

Includes:

1 x Predator Micro V3 Camera

1 x Manual

1 x OSD board

2 x Servo cable for Foxeer ClearTX VTX, Unify VTX

1 x Bracket

1 x Screw set

SKU: FP4M
0 out of 5
0 review(s)

Foxeer Predator V4 Micro

R750.00 R550.00

Foxeer Predator V4 Micro

0 out of 5
0 review(s)
R750.00 R550.00

SALE

Foxeer Micro Predator V4 Super WDR 4ms latency FPV Racing Camera.
Micro-sized all weather camera suitable for FPV Freestyle and Racing.
Huge improvements over the V3

What Is New:

Multi-mode: Day/Night/LED/B&W

More natural image

Improve the Super-WDR

Lower the noise

Mode switch shortcut

Remote control

Package Includes:

lx Bracket

1 x Servo Cable to Foxeer ClearTX VTX

1 x Servo Cable to TBS Unify VT

1 x 2pin OSD Cable

1 x OSD Board

1 x Manual

4 x Bracket Screws

4 x Gasket Ring

2 x Case Screws

SKU: ULTX
0 out of 5
0 review(s)

Friday FPV – Lycan ULTX 5.1

R850.00 R600.00

Friday FPV – Lycan ULTX 5.1

0 out of 5
0 review(s)
R850.00 R600.00

Lycan is designed to take a triple electronics stack, either 20x20mm or 30x30mm, and a micro 19x19mm camera.

Included in the Kit

Carbon

4 x 5mm carbon fibre arms

2 x 2mm carbon fibre top chassis plates

1 x 3mm carbon fibre main chassis plate

2 x 3mm carbon fibre side plates (notched to indicate cam angle, 45, 55 and 65 degrees)

Fasteners

5 x 18mm M3 cap bolts

5 x 12mm M3 cap bolts

9 x 8mm M3 button cap bolts (8 for motors)

4 x M3 stainless steel nylon lock nuts

2 x 20mm aluminium standoff

5 x press nuts

Fasteners have been matched up together in separate packets to make it easier to assemble the frame.

SKU: T700
0 out of 5
0 review(s)

Friday FPV – Yeti 5 inch

R850.00 R600.00

Friday FPV – Yeti 5 inch

0 out of 5
0 review(s)
R850.00 R600.00

This frame features full 3mm thick front and rear side plates and a 3mm thick base plate. The 4 individual arms have a 3 bolt pattern motor arrangement and are 4mm thick.

Included in the Kit

Carbon

4 x 4mm carbon fibre arms (Toray T300 UD Carbon)

2 x 2mm carbon fibre top chassis plates

1 x 3mm carbon fibre main chassis plate (chamfered and counterbore)

2 x 3mm carbon fibre camera side plates (notched to indicate mini cam angle)

2 x 3mm carbon fibre rear side plates

Fasteners

5 x 16mm M3 button cap bolts

9 x 12mm M3 button cap bolts

3 x 8mm M3 button cap bolts

5 x M3 stainless steel nylon lock nuts (wide flange with no serrated edge)

2 x 16mm aluminium standoff (pick your colour)

7 x press nuts

Fasteners have been matched up together in separate packets to make it easier to assemble the frame.

SKU: FSPBH
0 out of 5
0 review(s)

FULLSPEED BESTHAWK WHOOP – 2-3S – FRSKY

R2,300.00 R2,100.00

FULLSPEED BESTHAWK WHOOP – 2-3S – FRSKY

0 out of 5
0 review(s)
R2,300.00 R2,100.00

NameLessRC BestHawk 2-3S Whoop 25-400mW VTX

Specification:

Brand: NameLessRC
Item name: BestHawk Whoop
Prop: 40mm(1.5mm hole)
Motor: 1103 11000KV
Lipo: 2S~3S
Wheelbase: 75mm
Weight: 42g(PNP Without Battery)
Camera:Caddx EOS2
Antenna:Copper pipe antenna
VTX:NameLessRC Nano400 VTX
VTX output power: PIT/25/100/200/400mW
FC&ESC:NameLessRC  AIO412(2S-4S)

SKU: KOMODO

G- MADE – Komodo 4 Link Suspension 4WD Crawler Off Road Car Kit

0 out of 5
0 review(s)
R5,600.00 R4,999.00

Feature:

  • 1/10 Scale
  • 4 Link Suspension
  • 4 Wheel Drive
  • Ready to assemble RC model Kit
  • Steel Ladder Frame
  • Dust Proof Receiver Box
  • Adjustable Battery Plate
  • Skid Plate
  • 4-Link Suspension System
  • G-Transition Aluminum Shock Absorber
  • Full Time 4WD Four Wheel Drive
  • One-Piece Graphite Axle Housing
  • Metal Differential Cover
  • Solid Differential Gear
  • Dust Proof Transmission
  • Ball Bearing
  • Universal Shaft
  • 1.9inch Wheel & Tire
  • MT-1903 1.9inch M/T Off-Road Tire
  • NR02 1.9 inch Beadlock Wheel

Require:

  • Radio
  • Motor
  • Servo
  • Battery
  • ESC
  • Receiver
SKU: FD445STACK
0 out of 5
0 review(s)

HGLRC 20mm x 20mm Forward FD445 Stack

R1,930.00 R1,490.00

HGLRC 20mm x 20mm Forward FD445 Stack

0 out of 5
0 review(s)
R1,930.00 R1,490.00

Forward F4 MINIFlight Control

CPU: STM32F405R6T6

MPU: MPU6000-SPI

Input Voltage: 2-6S Lipo

Firmware: Betaflight OMNIBUSF4V6

Built-in Betaflight OSD to adjust PID

BEC Output: 5V@3A

Size: 25.0×25.0mm board

Installing Hole:20x20mm,M2

Weight:4.7g

Forward 45A 4in1 MINI ESC

CPU:STM32F051

Input Voltage: 2-6S Lipo battery

Constant Current: 45A-4S/35A-6S

Peak Current: 55A(5s)

BEC Ouput: NO

Firmware: BLHELI_32

Size: 31.7×36.5mm

Installing Hole:20x20mm,M2

Weight: 10.8g

Package Includes:

1x Forward F4 MINI Flight Control

1x Forward 45A 4in1 MINI ESC

1x Cable Set

SKU: ELF
0 out of 5
0 review(s)

HGLRC XJB-ELF Camera

R300.00 R260.00

HGLRC XJB-ELF Camera

0 out of 5
0 review(s)
R300.00 R260.00

Specifications:

Image sensor: 1/3 inch Super HAD II CCD
Horizontal resolution: 600TVL
Lens: 2.3mm, 120-degree FOV
S/N ratio: more than 60dB ( AGC off )
TV system: PAL
Electronic shutter speed: PAL: 1/50 to 100,000s; NTSC: 1/60 to 100,000s
Auto gain control ( AGC ): yes
Backlight compensation ( BLC ): yes
Min. illumination: 0.01 lux / 1.2F
WDR: D-WDR
DNR: 2DNR
Day / night: Color / Auto / Black and White
Input voltage: 5 – 36V DC
Size: 19 x 19 x 19mm

SKU: HGLRCF760ST

HGLRC Zeus F760 STACK 30X30 3-6S | F722 Flight Controller | 60A BL32 4in1 ESC

0 out of 5
0 review(s)
R1,750.00 R1,620.00

WITH LED’S

Zeus F722 3-6S F7 DJI Flight Controller MPU: MPU6000 CPU:STM32F722 RET6
Input Voltage:3-6S Lipo Size:37.3×37.3mm
Installing Hole:30.5X30.5mm,M3 With DJI connector Firmware:BF HGLRCF722(HGLR)/
EF 0.3.1 HGLRCF722/INAV 2.5.2 HGLRCF722

Forward 60A 3-6S BLHeli 32 4in1 ESC
Input Voltage: 3-6S Lipo CPU:STM32F051
BLHELI32 Firmware Steady Current: 60A
Peak Current: 65A(10 Second) BEC: NO
Supported Protocols: DSHOT1200/600/300/150.ONESHOT125/42
Installing Hole:30.5×30.5mm,M3 Size:45x40x6.5mm Weight:18g

SKU: LD70
0 out of 5
0 review(s)

Kyosho – Clutch Bearing

R50.00 R0.00

Kyosho – Clutch Bearing

0 out of 5
0 review(s)
R50.00 R0.00
SKU: TRX6637
0 out of 5
0 review(s)

La Trax 3.7V 650mAh 20C

R250.00 R110.00

La Trax 3.7V 650mAh 20C

0 out of 5
0 review(s)
R250.00 R110.00

FEATURES

1S shrink wrapped cell

INCLUDES

3.7V 650mAh 1S LiPo battery

SPECIFICATIONS

Length: 2.08″ (53mm)
Width: 1.18″ (30mm)
Thickness: 0.23″ (6mm)

USE TRX6638 CHARGER

SKU: 220x-5-inch
0 out of 5
0 review(s)

LIGHT 220X 5 inch

R600.00 R400.00

LIGHT 220X 5 inch

0 out of 5
0 review(s)
R600.00 R400.00

This frame is light and compact with removable arms.

Frame size – 220mm (5″ prop size)

Motor Holes – 22xx or 18xx

Fight Controller – 30.5mm pattern

SKU: 220x6
0 out of 5
0 review(s)

LIGHT 220X 6 inch

R600.00 R400.00

LIGHT 220X 6 inch

0 out of 5
0 review(s)
R600.00 R400.00

This frame is light and compact with removable arms.

Frame size – (6″ prop size) – Longer arms

Motor Holes – 22xx or 18xx

Fight Controller – 30.5mm pattern

SKU: 6967
0 out of 5
0 review(s)

Lumenier 4Power + Plus PDB

R300.00 R250.00

Lumenier 4Power + Plus PDB

0 out of 5
0 review(s)
R300.00 R250.00

The Lumenier 4Power + Plus PDB is a feature-rich power distribution board designed for small quadcopters. The board uses the standard 30.5mm mounting hole pattern (common to most flight controllers) to easily fit up to most airframes.

Features:

Input voltage range (3S-6S operation): 8 – 26VDC

PDB: 4x30A (Max.4x46A)

Regulated 5V (1.5A) and 10V (1.5A) outputs

Current Sensor 184A

Specifications:

2oz copper, 4-layers &1.6mm PCB.

1x Battery input, 4x ESC outputs. 2x BEC 5V outputs, 2x BEC 10V outputs.

Current Sensor, Gnd pads, Video Transmitter Signal & Gnd pads

Dimensions: 46x36x4mm, Weight: 8.5g

Mounting holes 30.5mm square spacing,Φ3mm

PDB (ESC outputs):

Continuous current: 30A per output Peak current (10 seconds/minute): 46A Max per output

BEC 5V outputs:

Designed for RC Receivers, Flight controllers, OSD, and Servos.

DC/DC synchronous buck regulator.

Voltage: 5.0 +/- 0.1VDC

Continuous current: 1.5 Amps (Max.2A 10s/minute)

Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)

Short-circuit tolerant (5 seconds/minute)

BEC 10V outputs:

Linear regulator, very low noise. LC Filter is needless.

Designed for Video TX or FPV camera.

Stable power output even on low voltage 3s (below 12v)

Voltage: 10.0V +/- 0.3VDC (4~5S operation)

Continuous current: 1.5A@16V IN (2A Max)

Short-circuit tolerant (2 seconds/minute)

Current Sensor:

184A / 3300mV

Includes:

1x Lumenier 4Power + Plus PDB

1x Lay-Flat XT60 power connector

1x Set of Nylon standoffs

4x M3 6mm hex standoff

4x M3x12mm screws

4x M3 hex nuts

SKU: LUMCHARP210
0 out of 5
0 review(s)

Lumenier QAV210 Charpu Edition

R850.00 R500.00

Lumenier QAV210 Charpu Edition

0 out of 5
0 review(s)
R850.00 R500.00

Frame Only

The new Lumenier carbon fiber QAV210 CHARPU mini FPV quadcopter. A rigid, light, and fast FPV racer and acrobat.

The QAV210 Carpu is designed to be the smallest possible airframe while comfortably supporting 5″ props and 220X size motors. The assembled kit containing Carbon Fiber Plates, Power Distribution Board and all hardware weighs in at only 91g.

Features:

Full 3K Carbon Fiber airframe featuring a solid 3mm thick “Unibody” main plate.

Multiple motor mounting holes to fit a variety of motors (M3 and M2 screw mounting patterns).

“Bumpers” on the end of the arms to protect the motor during a crash, just like the QAV250.

Flight controller cover plate includes cutouts for SMA connector and video transmitter as well as a holder for the included XT-60 Lipo pig-tail.

Included Lumenier 4Power power distribution board and XT-60 Pig-Tail to power ESCs and FPV flight electronics. The PDB can optionally be outfitted with a Pololu 12v or 5v voltage step-down (Pololu board not included).

Easy Lipo Access (suggested Lipo is a 1300mah 3 or 4s)

Support for 32mm board cams as well as 26mm cams in cases such as the Lumenier CM-650.

Support to carry HD camera (such as the GoPro 4, Mobius, or GoPro Session) with optional camera vibration mount (not included)

Included Landing Gear

Weight:

Airframe: 91g (with PDB and hardware), 96g with included Landing Gear.

AUW: The QAV210 is flown with an AUW of 256-281g depending on motor choice (includes all flight electronics and FPV gear but without Lipo or HD camera).

SKU: MD2.5
0 out of 5
0 review(s)

Massive Droner 2.5 inch

R660.00 R520.00

Massive Droner 2.5 inch

0 out of 5
0 review(s)
R660.00 R520.00

Frame Only

Takes 2 inch and 2.5-inch props

Most rigid structure possible

You could reach 70g – all up weight – without battery

Specifications:

Materials: Matte finish twill weave carbon fiber, aluminum, steel, and plastic hardware

Weight (no rear or side braces): 22g (includes all hardware)

Bottom Plate: 3mm thick

Required Front Brace: 2.5mm thick

Roll Cage Fin Plates: 1.5mm thick

Optional Side/Rear Brace: 2.5mm thick

Size (prop – prop): 114mm

Prop size: 2″ or 2.5″ props

Motors: 1105, 1106, 1107 or similar

Motor mounting hole pattern: M2 screws on 9mm diameter circle

FC/ESC mounting requirement: M3 or M2 @ 20mm x 20mm

FPV Camera requirement: Runcam or Foxeer micro or equivalent

SKU: CATNEW2
0 out of 5
0 review(s)

Merica 4 inch

R1,050.00 R950.00

Merica 4 inch

0 out of 5
0 review(s)
R1,050.00 R950.00

Frame Only – Canopy Sold Separately 

Dry frame weight with all included fasteners and canopy comes to only 48g.

The Merica’s arms are removable. They are held to the center fuselage by two screws. Field removal is super fast and can be completed within 5 minutes. Simply remove the outer screw, loosen the inner screw, remove the motor, and the arm is off.

Specifications:

48 grams (fasteners and canopy included)

Carbon Fiber: Twill Weave 3K Matte

Canopy Material: TPU (multiple colors available)

CF Arm Thickness: 4mm

Top CF Sandwich Plate: 2mm

Bottom CF Sandwich Plate: 2mm

Frame Type: XL (with staggered arms front to rear)

Frame Size: 170mm

Camera Angle Range: 10 – 75 degrees

Motors supported: 1407 (ideal), 1507, 1806, and similar

Lipos supported: 3s, 4s, 5s, 6s

Lipo mounting position: Bottom

Prop Size: 4 inch

Fastener Material: Aircraft Grade 7075

Fastener Color: Black

Ideal ESC: 4-in-1 design with 30.5mm x 30.5mm M3 mounting holes

Ideal FC: 30.5mm x 30.5mm M3 mounting holes (micro FC can be used with an  adapter)

Motor pad mounting holes: M2 screws on 12mm mounting circle

Supported FPV Cameras: Runcam Swift Micro or Foxeer Arrow Micro

SKU: MER5
0 out of 5
0 review(s)

Merica 5 inch

R1,130.00 R900.00

Merica 5 inch

0 out of 5
0 review(s)
R1,130.00 R900.00

Frame Only – Canopy Sold Separately 

Dry frame weight with all included fasteners and canopy comes to only 62g.

THIS IS A GOOD LOW KV – HV FRAME

The ‘Merica was born directly from customer feedback and our own internal race pilot testing and requests. We actually listen to pilot feedback and implement some of those ideas into our designs. This machine has some very unique and innovative pilot inspired features built in.

Low aerodynamic drag:

This frame uses an aerodynamically efficient arm design that is thin without sacrificing crash durability. Standard with the kit are 5mm thick arms and optional 6mm thick arms can be purchased as an upgrade. Arm design is not the only contributing factor for great aero. You also need a ‘slippery’ center fuselage that gives as little resistance to the oncoming air as possible. Merica’s ‘head’ is a TPU canopy that is designed to have a very low drag coefficient.

Build in flight controller/camera soft mount:

The flight controller and FPV camera are mounted to the TPU canopy. You read that correctly. The FC is NOT mounted to the carbon fiber frame. Mounting the FC to the TPU canopy means that any board you choose is soft mounted by default. The canopy is made of a flexible material and works to de-couple the board from the motors. The FPV camera is mounted at the top of the canopy. This mounting scenario helps to dampen vibration before it reaches your camera.

Ample space to fit standard sized components:

Plenty of space to fit ‘standard sized’ components with 30.5mm x 30.5mm mounting holes. 4-in-1 ESC’s are ideal with this frame. AIO FC/ESC/PDB’s such as the Asgard can be used as well. There are also 20mm x 20mm mounting holes for micro AIO ESC’s, and with THIS adapter you can mount in a micro FC.

Excellent crash durability:

The Merica comes standard with high-quality 5mm thick arms with optional 6mm thick arms available for purchase. Carbon fiber grain direction is aligned with the length of the arm for maximum crash toughness and rigidity. The entire top section of the frame is a flexible TPU canopy. During a crash, this structure will move and give instead of breaking like a carbon fiber top plate.

Clean air for the rear props:

This frame takes the stretch X design even farther and staggers the front and rear arms with respect to each other. The front arms sit at a lower elevation than the rear which helps to get more ‘clean air’ to the rear props.

Specifications:

62 grams (fasteners and canopy included)

Carbon Fiber: Twill Weave 3K Matte

Canopy Material: TPU (multiple colors available)

Standard CF Arm Thickness: 5mm

Optional CF Arm Thickness: 6mm (sold separately)

Top CF Sandwich Plate: 3mm

Bottom CF Sandwich Plate: 2mm

Frame Type: XL (with staggered arms front to rear)

Frame Size: 200mm

Camera Angle Range: 10 – 75 degrees

Motors supported: 2306, 2205, 2204, 1806, 1807 and similar

Lipos supported: 3s, 4s, 5s, 6s

Lipo mounting position: Bottom

Prop Size: 5 inch

Fastener Material: Aircraft Grade 7075

Fastener Color: Black

Ideal ESC: 4-in-1 design with 30.5mm x 30.5mm M3 mounting holes

Ideal FC: 30.5mm x 30.5mm M3 mounting holes (micro FC can be used with THIS adapter)

Motor pad mounting holes: M3 screws on 16mm or 12mm mounting circles

Supported FPV Cameras: Runcam Swift Micro or Foxeer Arrow Micro

SKU: MER5X
0 out of 5
0 review(s)

Merica 5 inch True X

R1,150.00 R900.00

Merica 5 inch True X

0 out of 5
0 review(s)
R1,150.00 R900.00

Frame Only – Canopy Sold Separately 

Dry frame weight with all included fasteners and canopy comes to only 69g.

Specifications:

69 grams (with canopy and fasteners)

Carbon Fiber: Twill Weave 3K Matte

Canopy Material: TPU (multiple colors available – sold separately)

Standard CF Arm Thickness: 5mm

Top CF Sandwich Plate: 3mm

Bottom CF Sandwich Plate: 2mm

Frame Type: True X (with staggered arms front to rear)

Frame Size: 204mm

Camera Angle Range: 10 – 75 degrees

Motors supported: 22xx, 23xx, 24xx or similar

Lipos supported: 3s, 4s, 5s, 6s

Lipo mounting position: Bottom

Prop Size: 5 inch

Fastener Material: Aircraft Grade 7075

Fastener Color: Black  

Ideal ESC: 4-in-1 design with 30.5mm x 30.5mm M3 mounting holes

Ideal FC: 30.5mm x 30.5mm M3 mounting holes

Motor pad mounting holes: M3 screws on 16mm or 19mm mounting circles

Supported FPV Cameras: Runcam Micro Eagle, Runcam Micro Swift 2, Foxeer Predator Micro, Foxeer Micro Monster, Runcam Micro Sparrow 2, or similar

SKU: 75METEOR
0 out of 5
0 review(s)

Meteor75 Whoop Quadcopter (BT2.0) – FRSKY

R2,250.00 R1,950.00

Meteor75 Whoop Quadcopter (BT2.0) – FRSKY

0 out of 5
0 review(s)
R2,250.00 R1,950.00

Meteor75, a better approach to the 75mm micro drone which features high KV motors – 1102 18000KV motorsBT2.0 450mAH battery, giving pilots plenty of power to use both indoor and outdoor spaces as a small scale acro playground.

Specification

SKU: MOSKITO
0 out of 5
0 review(s)

Moskito Trap – Brushless – With Transmitter

R2,800.00 R2,000.00

Moskito Trap – Brushless – With Transmitter

0 out of 5
0 review(s)
R2,800.00 R2,000.00

Basic Info:

Item Name: Moskito Trap – Elf

Wheelbase:83mm

Weight:80g (battery included)

Motor:BE1102-10000KV

ESC:4 in 1 Blheli_S Dshot F10A

Prop: Micro 5 blades prop

VTX: 5.8G/40CH/25MW

VTX distance:300M

Lipo: 2S 600Mah

Flight time: Around 6 minutes

Remote control:2.4G

Remote Control Channel:8 Channels

Remote Control distance:300M

Camera:1.8mm 170°(no microphone)

SKU: PTER3INCH
0 out of 5
0 review(s)

PTEROMINI 3 INCH FRAME FROM SHENDRONES

R600.00 R450.00

PTEROMINI 3 INCH FRAME FROM SHENDRONES

0 out of 5
0 review(s)
R600.00 R450.00

Blue and white canopies

Pteromini is a 150mm 3″ frame for 11xx-14xx motors that use a 9×9 mounting pattern. Frame weight is approximately 32g, auw as built without a battery is 107g.

The carbon baseplate is 3mm thick, and arms taper down to 6mm wide. Motor soft mounts/armguards are printed directly onto the frame, and the camera pod slips over the baseplate and the rear standoff.

The frame is made for 20×20 stacks and micro cams with 2.1 lenses.

SKU: RD5R
0 out of 5
0 review(s)

Raging Droner 5R

R1,400.00 R950.00

Raging Droner 5R

0 out of 5
0 review(s)
R1,400.00 R950.00

Frame Only – Does not include Turtle mode fin

Catalyst Machineworks is hard at work creating the next big revolution in 5″ race spec frames

Specifications:

75 grams (with hardware)

Carbon Fiber: Twill Weave 3K Matte

CF arm thickness: 5mm

CF arm brace thickness: 4mm

CF cage plate thickness: 2mm

Frame Type: Hybrid (Wide front arms, close in the rear)

Frame Size: 203mm

Camera Angle Range: 0 – 90 degrees

Motors supported: 22xx, 23xx, 24xx or similar

Lipos supported: 3s, 4s, 5s, 6s

Lipo mounting position: Bottom

Prop Size: 5 inch

Fastener Material: Aircraft Grade 7075, allow steel, black plastic

Accepted ESC: (30.5mm x 30.5mm or micro 20mm x 20mm)

Motor pad mounting holes: M3 screws on 16mm or 19mm mounting circles

Supported FPV Cameras: Micro Camera

Uses the same arms as the Merica!

Uses the same arm spacer as the Merica 3″

Uses the same rear arm brace as the Merica Stretch 5″

SKU: R3SB
0 out of 5
0 review(s)

Runcam 3S Battery

R400.00 R280.00

Runcam 3S Battery

0 out of 5
0 review(s)
R400.00 R280.00

Removable battery, allowing you to fly long sessions using multiple batteries without recharging (the battery will last about an hour, so this should be plenty of footage for most sessions).

Out of Stock
SKU: RUSH F722 STACK

RUSHFPV RUSH BLADE F722 Stack + 50A 3-6S BLHeli_32 4-in-1 ESC For DJI Digital FPV System

0 out of 5
0 review(s)
R1,930.00 R1,700.00

Specifications

RUSHFPV RUSH BLADE F722 Flight Controller For DJI Digital FPV System

  • MCU: 216MHz
  • GYRO: MPU6000
  • OSD: Onboard
  • Input Voltage: 3-8S
  • BEC: 5V/5A 10V/3A
  • Mounting Holes: 30.5mm x 30.5mm

RUSHFPV RUSH BLADE 50A 3-6S BLHeli_32 4-in-1 ESC – Sport Edition

  • Rated Current: 50A
  • Peak Current:60A
  • Input Voltage:3-6SLipo
  • MCU:F051 48MHz
  • PWM FREQ:48K
  • LED Color: Blue
  • Weight:16.2g
  • Dimension:45*36.5*7.5mm
  • BL32 FW: RUSH_BLADE_SPORT

RUSH PFB Power Filter Board

The 4 in 1 ESC can not achieve complete filtering due to its compact structure and high power. Excessive voltage peaks can cause interference to other components. Current surges generated during crashes can also have a strong impact on the MOSFET’s and the power supply and can cause damage.The RUSH PFB is small in size and can be installed at the tail of the ESC as a supplementary device for the filter. It is equipped with two 35V 330uF high-speed solid capacitors, and the parallel ESR is very low 5 m0 (TEST FREQ @10KHz)! It has a good filtering effect on high-frequency interference generated by ESC. There are 3 high-power TVS diodes on board, which can cut voltage peaks at ns speeds, and absorb high-voltage surges caused by collisions of the propeller during a crash in time to protect the field-effect tube and other components from the surge. We recommend installing it in a high-power 6S brushless system.

Includes

  • 1 x RUSHFPV RUSH BLADE F722 Flight Controller For DJI Digital FPV System
  • 1 x RUSHFPV RUSH BLADE 50A 3-6S BLHeli_32 4-in-1 ESC – Sport Edition
  • 1 x RUSH PFB Power Filter Board
SKU: SLAMN
0 out of 5
0 review(s)

SlamNasty 5 inch Race Frame

R1,000.00 R850.00

SlamNasty 5 inch Race Frame

0 out of 5
0 review(s)
R1,000.00 R850.00

Two versions are available. The only difference between the two is the standoff length. The SuperSlamNasty is for builders who prefer a very slammed deck (20mm of room from the bottom to top plate). The SlamNasty is a more standard type build with plenty of room for tall stacks (26mm of room from the bottom to top plate)

WE HAVE THE SLAMNASTY IN STOCK – 26MM OF ROOM – IF YOU WANT TO GET TO 20MM – YOU NEED TO PURCHASE A SET OF 13MM STANDOFFS

Specs:

  • (SlamNasty = 26.5mm working space top to bottom plate)
  • (SuperSlamNasty = 20mm working space top to bottom plate)
  • 65 grams (SlamNasty)
  • 64 grams (SuperSlamNasty)
  • True X frame layout
  • Frame Size: 207mm
  • Carbon Fiber: Twill Weave 3K Matte
  • CF arm thickness: 5mm
  • CF bottom plate thickness: 3mm
  • CF top plate thickness: 2.5mm
  • CF front cross brace plate thickness: 2.5mm
  • CF rear cross brace plate thickness: 2.5mm
  • CF front arm brace: 4mm (sold separate)
  • CF rear arm brace: 4mm (sold separate)
  • Camera Angle Range: 0 – 65 degrees
  • Motors supported: 22xx, 23xx, 24xx or similar
  • Lipos supported: 3s, 4s, 5s, 6s
  • Lipo mounting position: Bottom
  • Prop Size: Up to 5.1″
  • Fastener Material: High quality steel
  • Accepted ESC: (30.5mm x 30.5mm or micro 20mm x 20mm)
  • Motor pad mounting holes: M3 screws on 16mm or 19mm mounting circles
  • Supported FPV Cameras: Micro Camera
SKU: speed-addict-superlight-3-inch
0 out of 5
0 review(s)

Speed Addict SuperLight 3 inch

R750.00 R600.00

Speed Addict SuperLight 3 inch

0 out of 5
0 review(s)
R750.00 R600.00

Frame Only

The Speed Addict SuperLight was forged out of beautiful carbon fiber and aluminum by the FPV gods and then transported to this planet for the sole purpose of beating the crap out of everyone else on the race track.

The SuperLight is an XL frame. Meaning it is a stretched ‘X’ frame. The left / right side props have been pulled in towards craft centerline as close as possible, while the front/back props have been stretched away from each other. This is a wonderful geometric scenario for racing applications. The extended length allows for more stable and controllable pitch, which translates into more control of speed and altitude. The tightly packed frame width translates into lightning-fast roll maneuvers. When you combine this positioning of the motors and the SUPER LOW frame mass its a recipe for world domination.

This machine is perfect for a professional FPV pilot looking to put down the fastest ever MultiGP UTT time or the new guy just getting into FPV racing who has no idea what in the world the previous two paragraphs mean. The SuperLight is easy to build and tough as nails!

Features:

Super light frame

Sub 150 gram AUW (no lipo) possible

Tough as nails

130mm XL frame geometry

Easy to build

Easy to maintain

Fits 20mm x 20mm or standard 30.5mm x 30.5mm FC’s

Knurled silver anodized standoffs

Multiple Vtx / FPV antenna mounting options

Innovative Vtx / FPV antenna mount made of flexible TPU.

Catalyst Machineworks unmatched quality materials

Catalyst Machineworks unmatched quality fasteners

Catalyst Machineworks unmatched performance

Catalyst Machineworks unmatched customer support

Specifications:

29 grams (fully dressed with all hardware and 3D parts)

27 grams (no VTX mount or antenna mount)

Material: Twill Weave 3K Gloss CF

Bottom plate: 2.5mm thick

Top plate: 1.5mm thick

Frame Type: XL

Frame Size: 130mm

Motor pad mounting holes: M2 on 12mm bolt circle

Motors supported: 1306 or 1407

Lipos supported: 3s, 4s, 5s

Lipo sizes supported: 400mah to 1000mah

Lipo mounting position: Bottom

Fits 3″ props

Included 3D plastic parts color: Black

SKU: SD0016RV2

SWEEP – 1/10 TC 190mm Clear Body STC-4 Regular Weight.

0 out of 5
0 review(s)
R650.00 R500.00
Made out of 0.8mm Crystal clear Polycarbonate for today’s low flying machines. comes with a 1mm thick wing set.
  • Comes with a window mask and decal
  • Also available in light weight.
  • This V2 is ROAR approved version
  • SKU: SD0019R

    SWEEP – 1/10 TC 190mm Clear Body STC-6 Regular weight – 1MM

    0 out of 5
    0 review(s)
    R650.00 R500.00
    1mm thick body with a air scoop on the roof to lower about 95% of the center gravity, also featured rear body anti-tug skirt to keep you rolling.

    1.0mm thick

  • Comes with a window mask and decal
  • Packed with a regular weight wing (1mm)
  • SKU: SWEEPCB
    0 out of 5
    0 review(s)

    SWEEP 1/8 GT Clear Body P1L

    R1,200.00 R850.00

    SWEEP 1/8 GT Clear Body P1L

    0 out of 5
    0 review(s)
    R1,200.00 R850.00

    Aggressive windshield design keeping front end low to the ground while rear end glued on the surface.

    For maximum performance, please be sure to fill in your GT8’s front bumper with the anti-vibration tape to get maximum cornering speed

  • Comes with a complete windows mask and a stylish decal sheet
  • Wing and a set of fastner is included
  • SKU: TF40PRO
    0 out of 5
    0 review(s)

    T-Motor F40 PRO III 2600KV

    R350.00 R320.00

    T-Motor F40 PRO III 2600KV

    0 out of 5
    0 review(s)
    R350.00 R320.00

    The F40 Pro III continues the lineage of great FPV racing motors by T-Motor. The Pro III provides more thrust and increased durability compared to its predecessor.

    Equipped with high-temperature silver-core windings able to withstand up to 240C, the overall stability of the motor has been enhanced. The threading has also been strengthened to prevent stripping or fracturing of the motor shaft.

    Each Pro III motor is supplied with high-quality EZO bearings for maximum performance and lifespan. The new bell design looks amazing, while also providing the same non-slip propeller grip like the Pro II.

    Out of Stock
    SKU: 1550MAH
    0 out of 5
    0 review(s)

    Tattu R-Line V3 14.8V 4S 1550mAh 120C

    R630.00 R570.00

    Tattu R-Line V3 14.8V 4S 1550mAh 120C

    0 out of 5
    0 review(s)
    R630.00 R570.00

    Specifications:

    Minimum Capacity: 1550mAh

    Configuration: 4S1P / 14.8V / 4Cells

    Discharge Rate: 120C

    Net Weight(±10g): 176g

    Dimensions:76mm x 38mm x 33mm (L x W x H)

    Charge Plug: JST-XHR

    Discharge Plug: XT60

    SKU: TBS1
    0 out of 5
    0 review(s)

    TBS Power Cube – Elite Bundle

    R1,500.00 R999.00

    TBS Power Cube – Elite Bundle

    0 out of 5
    0 review(s)
    R1,500.00 R999.00

    Comes with a Diagonal ESC board

    The most powerful, reliable, and feature-filled two-layer racing combo on the market. Contains a PowerCube FPVision, an ESC Extension board, and a Colibri Race V2.0. You’ll wonder what to do with all the extra room! 

    Specifications: 

    TBS-PCFPVISION

    Current Sensor: 100A sense, 250A peak throughput

    Dimensions: 36mm x 36mm x 6mm

    2-6S capable

    Full graphics Core Pro OSD

    25 – 800mW Video Transmitter with PitMode and CleanSwitch

    Lost-model buzzer, R/C switch activated

    Filtered power for the cam (software select 5V / 12V)

    Dual camera ports (with cam1 menu navigation feature)

    TBS-PCESCBOARD

    The TBS Powercube External ESC board is intended for use with the TBS Powercube Colibri Race Flight Controller. This allows for customized setups, with any ESC’s on the market.

    TBS-COLIBRIRACE

    STM32F3 Processor for ultimate processing power

    PPM, SBus, DSM2, DSMX inputs (5V and 3.3V Provided)

    6 PWM ESC Outputs

    Plug and Play Sockets or Solder Pads for R/C Input and Buzzer

    36x36mm Standard Size, 30.5mm Mounting Holes

    RGB LED Strip Support

    Extension Port for GPS, Compass, Pressure Sensors

    UART Serial Ports for peripherals such as Blackbox, SerialRX, and Telemetry

    5V Buzzer Output

    MPU6500 Gyro

    Cleanflight Compatiblity

    LED Status onboard

    4.4g All Up Weight

    SKU: T1303
    0 out of 5
    0 review(s)

    Tmotor F1303 5000kV Micro Motor

    R310.00 R265.00

    Tmotor F1303 5000kV Micro Motor

    0 out of 5
    0 review(s)
    R310.00 R265.00

    The F 1303 toothpick motor from Tmotor is ideal for lightweight 3″ toothpick quadcopter builds.

    SPECIFICATIONS

    • KV: 5000
    • Configuration: 9N12P
    • Shaft Diameter: 2mm
    • Motor Dimensions: Ø16.5*14.55mm
    • Weight Including Cables (g): 6.1g
    • No.of Cells (Lipo): 2-3S
    • Max Power: 87W
    • Peak Power: 7.45A
    • Internal Resistance: 280
    • Motor wires: 24#AWG 85mm
    SKU: PSTIC
    0 out of 5
    0 review(s)

    Toothpick PowerStick 3-4S – FRSKY

    R3,550.00 R3,250.00

    Toothpick PowerStick 3-4S – FRSKY

    0 out of 5
    0 review(s)
    R3,550.00 R3,250.00

    SALE

    Specification:

    Brand: NameLessRC
    Item Name: PowerStick inspired by KababFPV / PowerStick DVR Version inspired by KababFPV
    Prop: Gemfan 3016-3
    Motor: T-MOTOR 1303 – 5000KV
    Lipo: 3S~4S
    Wheelbase: 110mm
    Weight: 60g(PNP Without Battery)
    Camera:Runcam Nano2
    Antenna: Copper pipe antenna
    VTX: NameLessRC NANO400 VTX
    FC&ESC:NameLessRC  AIO412T(2S-4S)

    SKU: ZMRSL
    0 out of 5
    0 review(s)

    ZMR Slim Race Frame

    R800.00 R500.00

    ZMR Slim Race Frame

    0 out of 5
    0 review(s)
    R800.00 R500.00

    Introducing the ZMR Slim. It can use the arms from the ZMR 250 which are cheap and easy to obtain, with 3 custom designed center plates. The goal with this frame was to make a small light spec class racing quad with 5″ Props.

    Top plate thickness: 1.5mm

    Base Plates: 2.0mm

    Arm Thickness: 3.0mm

    Bumpers: Bumper (Same thickness as Arms

    Hardware Options: Red Standoffs