Shrink Ratio: 2:1
MAX SIZE PACK THAT CAN BE USED IS A 6S PACK – 38mm X 36mm
Since the shrink ratio is 2 to 1 you can use a smaller pack as long as it isn’t too small. Most 4s, 5s, and 6s packs racers and freestyle pilots use will work.
The adapter plugs into the 6-cell balance port on the charger and breaks out into the 2S, 3S, 4S, 5S and 6S connectors.
With this adapter, you get a One-size-fits-all module that will work with any battery from 2 cells up to 6 cells.
Easy to use – works with any 1-8S Lipo/Li-Ion/LiMn/Li-Fe RC drone battery
Just plug into the balance plug and the LED will cycle through the individual cell voltages as well as list the total voltage
You can set the alarm from 2.7 to 3.8V per cell or you can turn the alarm off
Super loud alarm sound makes it easier to find your drone
Protect the battery from overcharging and overdischarging
Tarot Para Board TL2716 Lipo Parallel Charger Board XT60
Protects the charging batteries when short circuit happens.
Supports combined use for three parallel charging boards ( It means you can charge eighteen batteries which have the same characters at the same time).
Has 20Z-thick copper foil, so it can withstand continual current of 80A.
Prevents each cell overcharge and improves balance efficiency. And the later period of the balance charging cycle is shorted substantially.
Consumes only 1/6 of the time when charging six batteries separately consumes, saving the total charging time.
Avoids the trouble of replacing batteries repeatedly.
Quickly know whether your quad has a short, and protect it from certain peril. By plugging this in between your battery and your quad, you can limit the current getting to your quad. If the LED is on, there is no short. If the LED is faded, blinking, or off, then there is a short and you should check your quad. This is a great tool, but we recommend you pair it with the use of a multimeter to check for shorts to be sure you are not going to toast your precious goods!
Smoke Stopper uses a Resettable fuse (PPTC). Connectors are high-quality Amass XT60’s.
1-5s capable (24v Max)
1.1A Hold Current, 2.2A Trip Current
0.5S Trip time
Plug the Solid State Smoke Inhibitor between the battery and the device.
Green led on, OK.
Green led dim or blinking, Fuse tripped.
Green led off, Shorted.
To reset the Solid State Smoke Inhibitor, unplug for 10 seconds.
Note: Solid State Smoke Inhibitor/ Lightbulbs / Fuses / Circuit breakers are not 100% foolproof way of keeping the magic smoke in. It’s always best to use in conjunction with a multimeter. This is NOT and end all, be all kind of protection. Nothing is. If you wire something wrong, it will likely still blow (ie apply 16v to a 5v system). This is a failsafe, one that will probably help you but may not depending on the kind of error you make. Double check wiring schematics, check your gear with a multimeter, and lastly us a Smoke Stopper. Do not wire things up randomly and hope a Smoke Stopper will save you
Quickly after the release of the Remix, the demand was loud and clear. Ummagrip is now available in a universal, cut-to-size, battery pad that can be fitted to just about any frame. The Ummagrip universal battery pad is 100mm long, by 50mm wide, and 3mm thick. There’s definitely plenty of material to cover most frames and keep your battery clear of any bolts. Ummagrip was molded directly onto high quality 3M permanent adhesive on the frame side and textured with a debossed Ummagawd logo pattern on the battery side. These features help the pad stay on your frame and grip batteries without getting stuck to them.
We’ve found that a damp sponge is the best method to clean off your Ummagrip. Water is all that’s needed to get dust and dirt un-stuck from the pad, but as it gets cleaner and drier, it gets more and more sticky. So avoid things like paper towels, tissues, t-shirts, or rags as they might leave too much lint behind.
Although Ummagrip is extremely sticky when clean and dust free, it does not need to be perfectly clean to still work. Even well coated in dust, it still grips batteries noticeably better than foam or rubber pads ever could. Ummagrip is the new standard. Anything else would just be irresponsible.
XT60 to XT30 Plug Female Male Adapter Converter for RC Lipo Battery FPV Drone Lipo NiMH Battery Charger ESC(4pcs Male XT60 to Female XT30 and 4pcs Female XT60 to Male XT30)
1PCS Male XT60 to Female XT30 Adapters.
1PCS Female XT60 to Male XT30 Adapters.
Application: Used for convert battery with XT60 to XT30 or XT30 to XT60 on RC lipo battery FPV Drone lipo NiMH battery charger ESC etc.
Solid and secure connection , light weighted, reduce the weight for rc models.
No wires design, save more space,portable and easy to use.Save time soldering by using these connectors.
1 * Male XT60 to Female XT30 Adapters
1 * Female XT60 to Male XT30 Adapters