Whoops
BETA – FPV Whoop Racing Advanced Kit 2 – FRSKY
BETAFPV Advanced Kit 2 – the best RTF kit for the drone starter as well as FPV pros to practice indoor. The special design of Meteor75 Lite brushless drone, remarkable LiteRadio 2 and VR01 FPV Goggles, bring you unforgettable flight experience.
Package
- 1 * Meteor75 Lite Brushless Whoop Drone
- 1 * LiteRadio 2 Transmitter (350mAh 2S Battery Included)
- 1 * BETAFPV VR01 FPV Goggles
- 4 * Gemfan 40mm 3-blade Propeller(1.5mm Shaft)
- 1 * USB Charging Cable
- 2 * Dipole 5.8G Antennas
- 1 * BT2.0 Battery Charger & Tester
- 2 * BT2.0 450mAh battery
- 1 * Props Removal Tool
- 1 * User Manual
- 1 * Customized EVA Carry Case
BETA 1105-5000KV Brushless Motors (4PCS) for Beta 85X
SPECIFICATION
- Height: 14mm
- Weight: about 5.2g (1 pc)
- Shaft: φ1.5mm
- Motor Mount Holes: M2.0 on Dia 9.0mm
- KV (rpm/V): 5000 – UP TO 4S
- Plug and cables:
- Micro JST-1.25 3-pin connector with 28AWG cables (5000KV)
BETA 1106 4500KV Brushless Motors（4pcs）
Rated at 4500KV / 5000KV, 1106 Brushless Motor hits the sweet spot for high-powered 4s power.
SPECIFICATION
- Height: 14mm
- Weight: 6.6g (1 pcs)
- Shaft: φ1.5mm
- Motor Mount Holes: M2EQS on Dia 5.0mm
- KV (rpm/V): 4500KV
BETA 2S Whoop Cable Pigtail (BT2.0) – EACH
Specifications
- Item: 2S Whoop Cable Pigtail (BT 2.0)
- Connector : BT2.0
- Cable: 22AWG
- Length: 55mm (Not including the plug)
- Weight: 1.5g
- Note: Blue represents positive pole (+); White represents negative pole(-)
BETA 2S Whoop Cable Pigtail (XT30) – EACH
Specifications:
Connector: Male XT30 power cables
Length: 55mm (Not included the plug)
BETA 31mm 3-blade Whoop Propellers (1.0mm Shaft Hole) (4pcs)
Specification
- Item: 31mm 3-blade Props
- Blades: 3
- Material: PC (Poly Carbonates)
- Center Thickness: 5mm
- Prop Disk Diameter: 31mm
- Mounting hole: 1.0mm shaft
- Max Prop Width: 5.71mm
- Weight (2CW+2CCW): 1g
BETA BT2.0 450mAh 1S 30C HV Battery – EACH
SPECIFICATION
- Item: 1S battery
- Capacity: 450mAh
- Rate: 30C/60C
- Voltage: 4.35V
- Dimension: 61*15*7.5mm
- Connector: Betafpv BT2.0 connector
- Weight: 12.7g(1pcs)
Beta C01 Pro FPV Micro Camera 4:3
Specification
- Image Sensor: 1/3″ CMOS Sensor
- Horizontal: 1200TVL with Global WDR
- Signal System: NTSC
- Lens : 2.1mm(M8) FOV 160°
- S/N Ratio: >50db
- Electronic Shutter Speed: Auto
- Auto Gain Control (AGC): Auto
- Min. Illumination: 0.01Lux@1.2F
- D-WDR: Auto
- Day/Night: Color
- Power: DC 3.3-6V
- Current: 110mA@6V / 120mA@3.3V
- Housing Material: ABS
- Dimension: 12.1*14.5mm
- Net weight: 1.96g
The C01 Pro Micro Camera is a rare FPV camera currently on the market, which adapted a 1/3” CMOS sensor and a 2.1mm lens for 1200TVL resolution and excellent latency while minimizing the weight to 1.96g. Designed specifically for those weight-sensitive drones, such as Brushed & Brushless Whoop Quad.
BETA Canopy – 75X
BETA Canopy – 75X
Awesome canopy with PC material, all the advantages of being tough, strong, flexible and heat-rersistant. With adjustable 25°- 45° angle, this canopy is perfectly suitable for the EOS2 CAM
Specification
- Material: PC
- Weight: about 2.4g
- Tilt Angle: 25°-45° Adjustable
BETA F4 2S Brushless Flight Controller – V2 FOR WHOOP
F4 AIO FC 12A V2 is upgraded in these 2 spark points.
- Add 8M Flash chip for Betaflight Black Box.
- 3 full UARTs (UART1, UART2 and UART6) are available. Pilots could use one UART for DJI digital FPV unit or Caddx Vista digital FPV unit and the other UART for external receiver like TBS Crossfire.
SPECIFICATIONS OF FC
- CPU: STM32F411CEU6 (100MHZ )
- Six-Axis: MPU6000 (SPI connection)
- Size: 26mm x 26mm, whoop mounting pattern
- Firmware version: BETAFPVF411 (BEFH)
- OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
- Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver. Add Frsky R9M Receiver and BETAFPV Micro DSMX Receiver (Don’t support DSMX RX with 3.3V solder pad ) since V1.2.
- Support programmable LED like WS2812 etc
- Built-in current sensor
- Weight: 5.07g
SPECIFICATIONS OF ESC
- Support BLheli/BLHELI_S suite Pass-through ready
- Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
- Input voltage: 2S-4S Lipo
- Continue current: 12A
- Peak current: 13A
- Firmware: BLHELI_S
- Processor: SILABS EFM8BB21F16G
- Motor Connectors: 1.25mm header pins connector
- Factory firmware: G-H-30-16.7
BETA F4 V2 4S Brushless Flight Controller and ESC (BLHeli_32) 16A
After several months of research, the greatest combination of F405 4S Brushless Flight Controller with BLHeli_32 16A ESC has been released which totally supports 4S power with a steady performance. BLHeli_32 16A ESC is customized for Beta85X whoop drone. Meanwhile, Beta85X is the first micro drone with a BLHeli_32 ESC at present.
SPECIFICATIONS OF FC
- CPU: STM32F405 (Overclock to 240MHz)
- Six-Axis: MPU6000
- Size: 26mm x 26mm, whoop mounting pattern
- Firmware version: BETAFPVF405 (BEFH)
- OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
- RX3 and TX3 are with auto inverter, supporting all RX including TBS Micro RX
- TX01 and RX01 ports are available for Frsky F-Port, DSM2/DSMX
- Buzzer solder pads
- Support programable LED like WS2812 etc
- Weight: 4.2g
SPECIFICATIONS OF ESC
- Support BLHELI_32
- Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
- Input voltage: 3-4S lipo
- Cotinue current: 16A
- Peak current: 19A
- Firmware target: BETAFPV-16A-32bit
- MCU: STM32F051K66
- Motor Connectors: 1.25mm header pins connector
- Weight: 4.4g (7.7g with XT30 cable)
BETA Flame Canopy
BETA FPV – 1103 11000KV Brushless Motors – 4 PCS
Lightest 1103 motors in the world. Only 3.2g with connector. This motor fits the Beta75X 2S Whoop drone. A 1.5mm header pins connector is included. So no soldering needed, just plug and play.
Info:
1103 11000KV brushless motors are customed for 2S brushless whoop drone.
Fit with 1735, 1935, 2030, 3020 propellers
Shaft Diameter: 1.5mm, Weight: 3.2g
Compatible with 2S lipo battery
Recommended Parts:
Propellers: 40mm 4-blade props (1.5mm shaft hole)
Frame: Beta75X frame
FC & ESC: BETAFPV 2S Whoop FC cube
Specification:
Height: 14mm
Weight: about 3.2g
Shaft: φ1.5mm
Motor Mount Holes: M1.6 on Dia 8.5mm
KV (rpm/V): 11000
Voltage: 7.4V, 2S Lipo battery
Plug: Micro JST-1.25 3-pins connector
Beta FPV – Z02 AIO Camera 5.8G VTX
Z02 AIO camera VTX is the newest video transmitter by BETAFPV. It has 2 great improvements. First, the switchable power output between 0mW, 25mW, and 200mW. Second, Smart Audio is included and pilots can control the VTX via the radio transmitter.
Features:
First switchable power output between 0mW, 25mW, and 200mW.
Second, Smart Audio is included and pilots could control the VTX via your radio transmitter.
Two camera mount angle is provided: 25 degree – white.
Switchable power includes 0mW, 25mW and 200mW.
Smart Audio function is included in this AIO Z02 camera. The flight controller can communicate with the video transmitter using the audio line in. It allows the flight controller to know what frequency the VTX is using, and to change it.
25° provided.
Dipole whip high sensitivity antenna
How to Change Frequency & Channel & Power:
Frequency group A~F selected still touch up to 2 secs
Channel ch1~ch8 selected with short touch.
Power switch with long touch up to 5 secs.
BETA FPV 1103 8000KV Motors – 4PCS
Lightest 1103 motors in the world – 8000KV- specially made for Beta75X 3S, also suitable for most 3S whoop on the market, provide you with much more thrust.
A header pins connector is included. So no soldering needed, just plug and play.
Specification
- Height: 14mm
- Weight: about 3.8g (8000KV)
- Shaft: φ1.5mm
- Motor Mount Holes: M1.6 on Dia 8.5mm
- KV (rpm/V): 8000
- Plug: Micro JST-1.25 3-pins connector
Beta Lipo – 350mAh 2S – Each
Beta Lipo – 350mAh 2S – Each
Specifications:
Weight: 20g
Size: 57.8×16.3x12mm
Connector: XT30 with 20AWG silicone wire
Pack: 2S 7.4V
Rate: 35C/70C
