VTX
FSD TX600 VTX
FSD TX600 VTX
Description:
Item name: FSD TX600 VTX
Output power: PIT/25mW/100mW/200mW/400mW/600mW switchable
Control mode: BFOSD control(RX)/button
BAT: 5V+
Video system: NTSC/PAL
Antenna: IPEX
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362-5945 MHZ
(TX600’s factory set up is on lock mode(5733-5866MHZ unlock). Please follow your local laws and regulations
if you need to unlock the frequency.)
Size: 26*26mm(L*W),Hole:20*20mm
Weight: 2.3g
Package Included:
1 x FSD TX600 VTX
1 x 5.8G Linear Antenna
1 x 6Pin Cable
4 x M2x5 standoffs 5mm tall Nylon
4 x M2 Nylon Nuts
Lumenier TX5G2R Mini 200mW 5.8GHz Transmitter
The Lumenier TX5G2R Mini 200mW 5.8GHz 32CH FPV video transmitter is the perfect VTX for FPV racing! The 200mw transmission power is a good medium power output meaning more pilots can fly together without overpowering each other on close frequencies while still getting decent range. The TX5G2R has 32 channels including the new Raceband frequencies.
The TX5G2R features an easy to use single button, LED interface. It also comes with a clean pre-wired harness, and only weighs 7.5g! It stays cool to the touch during operation, so you don’t have to worry about it overheating in a crash.
Our friends from ImmersionRC first divided the 5.8 bands into 8 channels evenly spread out 37MHz from each other, which allows more racers flying at the same time on the same band. Lumenier Raceband transmitters are fully compatible with FatShark and ImmersionRC receivers. The Tx includes a 5v output to power FPV cameras and an onboard microphone to transmit audio to your receiver.
The TX5G2R features an easy to use single button, LED interface
Features
32 channels: Covers 4 Bands
Intuitive and easy to use button and LEDs for frequency selection
Provides 5v power output for FPV cameras
Small sized and lightweight
Transmitter frequency: 5658-5925MHz with a 200mW power output
Transmitting distance > 500-1000m (open area)
SMA Antenna connector
Dimensions: 32mm x 22mm x 9mm (not including SMA adapter)
Audio: Includes onboard microphone
Specifications:
Operating Voltage: 7 – 20V
Supply current: 200 mA
Operating Temperature: -10 +85 C
Video Band Width: 5-6 MHz
Audio Carrier Frequency: 6.5 MHz
Video Input Level: 0.8,1.0,1.2 Vp-p
Video Input Impedance: 75 Ohm
Audio Input Level: 0.8 ,2.0 Vp-p
Audio Input Impedance: 10K Ohm
Weight: 7.5g (without antenna)
Antenna Connector: SMA Female Connector
Video Format: NTSC/PAL
Frequency Selection: Single push to change CH, push and hold for 2 seconds to change FR
Frequency and channel frequency table:
| Band | Channels | ||||||||
| CH1 | CH2 | CH3 | CH4 | CH5 | CH6 | CH7 | CH8 | ||
| Band 1 | FS / IRC | 5740 | 5760 | 5780 | 5800 | 5820 | 5840 | 5860 | 5880 |
| Band 2 | Lumenier / DJI | 5705 | 5685 | 5665 | 5752 | 5885 | 5905 | 5925 | 5866 |
| Band 3 | Bosecam A | 5865 | 5845 | 5825 | 5805 | 5785 | 5765 | 5745 | 5725 |
| Band 4 | Raceband | 5658 | 5695 | 5732 | 5769 | 5806 | 5843 | 5880 | 5917 |
Compatible with Fatshark, ImmersionRC, Boscam, Foxtech and other generic branded FPV receivers within the same frequency range.
Includes:
1 x transmitting unit (VTX) TX5G2R
1 x antennas (2db)
1 x power/video cable
Locking connector, female JST for voltage in, female servo plug for video and 5v out.
1 x 12V Step-Down Voltage Regulator
Note: TX antenna must be installed properly before it is switched on. Powering on without installing an antenna, or using an improper antenna may easily burn the TX, and such damage is not covered by warranty. When using this transmitter on builds with ESC’s that feature regenerative braking, we strongly recommend powering the transmitter with the included 12V step down regulator to protect it from voltage spikes.
NLRC Nano400 VTX
NLRC Nano400 VTX
Specifications:
Brand Name: NameLessRC
Item Name: Nano400 VTX
Output Power: PIT/25mW/100mW/200mW/400mW Switchable
Control Mode: BFOSD Control(RX)
Input Power: 5V
Video System: NTSC/PAL
Antenna: IPEX
Size: 12.4MM*12.4MM*3.5MM
Weight: 0.7g
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362-5945 MHZ
The NameLessRC Nano400 VTX‘s factory set up is on lock mode
(5733-5866MHZ unlock).
Package Includes:
1 x Nano400 VTX
1 x 5.8G Linear Antenna
4 x Silicone Wire
1 x Heat shrinkable tube
RUSH RACE
RUSH RACE
Specifications
- Item name: Rush VTX Racing
- Lipo Battery: 2-8S
- Input Voltage: 7-36V DC
- Output Voltage: 5V 1A
- Channels: US Legal
- Power: PIT/25/50/200/500 mW
- Installation hole: None
- Dimensions: 33*21*4.25 mm
- Weight: 5.5g
Includes
- 1x Racing VTX
- 1x MMCX to SMA Cable
- 1x 6pin Harness
Rush Tank Ultimate Plus 5.8GHz VTX
Specifications
- Item Name: Rush Tank Plus
- Input Voltage: 7-36V DC
- Output Voltage: 5V 1A
- 12V Input Current: 40mA@Pitmode, 95mA@25mW, 185mA@200mW, 250mA@500mW, 380mA@800mW
- Channels: 48CH RaceBand / LowRace
- Power: PIT/25/200/500/800 mW
- Dimensions: 33.6*22.8*4.1 mm
- Weight: 6.66g(without cable)
Includes
- 1 x Rush Tank Ultimate Plus 5.8GHz VTX w/ Smart Audio
Rush Tiny Tank Racing 5.8GHz VTX
Rush Tiny Tank Racing 5.8GHz VTX
The RUSH Tiny Tank is a high-quality 5.8GHz VTX with strong anti-interference ability and stable transmission. Rush has removed the mounting holes and reduced the size to save weight which is crucial for racing quads. New LOCK-ON technology prevents frequency drift, allowing up to 8 pilots to fly simultaneously without interference.
The TANK has four adjustable levels of transmitting power. They are PIT/25/50/200/350mW respectively.
This VTX has built-in SmartAudio2.0 protocol authorized by TBS. This can be set up and view the VTX information via the OSD menu.
The full metal casing means efficient heat dissipation as well as great protection from crashes and dings.
- Weight : 1.4g
- Size : 17×12.5mm
- Input Voltage : 5V
- Power : 25, 100, 200mW (Max. 350mw)
- Channels : 48
- Antenna Connector : U.FL (IPEX)
TBS UNIFY PRO 5G8 HV – RACE (SMA)
Main features:
Smallest, lightest video transmitter on the market
2-6S input power supported
25mW / 200mW power settings
Included:
TBS UNIFY 5G8 Video transmitter
Video Transmitter pigtail cable & manual
PitMode – Made to race:
Zero interference even while powered up, it’s now a possibility! If you’ve ever repaired a quad during a race, you’ll know the frustrations of not being able to power on and test your system. With PitMode, we will reduce the output power to a bare minimum (way below single digit mW’s), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You’ve got a few meters of range to put your quad through its paces before placing it on that starting grid, and in combination with CleanSwitch you can power on as soon as your channel is available without interrupting any of the active channels.
SmartAudio V2 – Full control:
SmartAudio technology provides UART and I2C control for your entire video transmitter. Parameters such as output power, bands, channels, and frequency can be freely controlled. This enables remote channel control directly from a smart device (TBS Crossfire, external Bluetooth or wifi module required), from your radio (TBS Crossfire with TBS Tango or OpenTX compatible remote required), or from the OSD (e.g. TBS CORE PRO). With all these options available, you ought to find something that fits your bill. Together with CleanSwitch, the sky is the limit … jump between channels without interfering fellow pilots in air, create backup-/emergency-frequencies, global VTx power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!
CleanSwitch – Neighbor friendly:
CleanSwitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. TBS CleanSwitch will allow you to power on and change channels while your buddies are in the air, without any external interference. CleanSwitch is race friendly, and pilot-friendly … that’s how we like it at TBS 🙂
Say NO! to Dipswitches:
Even though learning binary was a fun mind-game, in practice a single-push-button or OSD-controlled video transmitter is just much easier to operate. Gone are the days of video transmitter cards, stepping on people’s channels by mistake, or a mismatch between your goggle and video transmitter frequencies.
Specifications:
Operating Voltage: 2S – 6S
Supply current: 600mA
Operating Temperature: watch for normal airflow
Audio Carrier Frequency: 6.5 MHz
Video Input Impedance: 75 Ohm
Weight: 5g (with SMA, without antenna)
Antenna Connector: SMA Female Socket with screw mounting holes, U.FL to VTx
Video Format: NTSC/PAL
Output Power: 13dBm (25mW), 23dBm (200mW)
TBS Unify Pro 5G8 HV Race – MMCX
TBS Unify Pro 5G8 HV Race – MMCX
Smallest, lightest video transmitter on the market
2-6S input power supported
25mW / 200mW power settings
Ultra-clean transmission (up to 16 pilots at once!)
PitMode – power up your quad during a race
Easy OSD, FC and RC channel changes, with fallback button menu
Robust RF amplifier allows powering up without antenna for hours!
Clean powerup and video switching
Pitmode – made to race
Zero interference even while powered up, it’s now a possibility! If you’ve ever repaired a quad during a race, you’ll know the frustrations of not being able to power on and test your system. With pitmode, we will reduce the output power to a bare minimum (way below single digit mw’s), and move to frequencies unused by race organizers, to allow you to power up your quad and still see the image! You’ve got a few meters of range to put your quad through its paces before placing it on that starting grid, and in combination with cleanswitch you can power on as soon as your channel is available without interrupting any of the active channels.
Smartaudio v2 – full control
Smartaudio technology provides uart and i2c control for your entire video transmitter. Parameters such as output power, bands, channels, and frequency can be freely controlled. This enables remote channel control directly from a smart device (tbs crossfire, external Bluetooth or wifi module required), from your radio (tbs crossfire with tbs tango or opentx compatible remote required), or from the OSD (e.G. Tbs core pro). With all these options available, you ought to find something that fits your bill. Together with cleanswitch, the sky is the limit … Jump between channels without interfering fellow pilots in air, create backup-/emergency-frequencies, global VTX power adjustments by race organizers or other clever systems aimed at streamlining and improving race management are now a possibility!
Cleanswitch – neighbor friendly
Cleanswitch is a technology developed at TBS that will ensure that your video transmitter is interference-free while powering on, or while changing channels. All current video transmitters swipe across the entire band while being powered on, often resulting in flickering and heavy interference to anyone in the air, regardless of video channel chosen. Tbs cleanswitch will allow you to power on and change channels while your buddies are in the air, without any external interference. Cleanswitch is race friendly and pilot-friendly.
TBS Unify PRO NANO 5G8
TBS Unify PRO NANO 5G8
Specifications:
Input Voltage: 4.5V – 5V
Power levels: 25mW / 50mW
Interface: SmartAudio and capacitive button (or solder external tactile button separately – included!)
Weight: 1.4g! (incl. antenna)
Size: 13.2mm x 14.6mm
Antenna connector: u.FL (upgraded)
Antenna length: 45.6mm (end to end)
TBS Tech: Smart Audio, Clean Switch
Includes:
1x Unify Pro nano 5G8 VTX
1x button switch
1x TBS UNIFY PRO 5G8 Linear Antenna
6x 30awg silicon connection wires (2 black, 2 red, 1 white, 1 yellow)
