4 in 1 ESC's
HGLRC 20 x 20mm 33A BLheli_S – 4 In 1 ESC
The voltage requests to be 3.5V above when you use 2S Lipo for 33A ESC.
Specification:
Brand Name: HGLRC
Item Name: 33A BLheli_S BB2 2-4S 4 In 1 ESC
Input Voltage: 2-4S Lipo battery
Constant Current: 33A
Peak Current: 38A
BEC Output: NO
Firmware: BLheli_S 16.5
Size: 27x27mm (mainboard)
31x31mm ( including pad)
Installing Hole: 20x20mm, M2
Weight: 4.2g
CPU: SILABS EFM8BB2 48MHZ
MOS Tube: TOP QUALITY MOSFET
Firmware: Betaflight 16.5
Support Damped Mode, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, forward and reverse
Usage: Original parts for XJB F438// F438-TX20.V2
Package Included:
1 x 33A 4 In 1 ESC
HGLRC 20 X 20mm 40Amp 32bit – 4-in-1 ESC
Specification:
HGLRC DinoShot 40AMP 3-5S BLHeli32 4-in-1 ESC
Input Voltage: 3-5S Lipo battery
Constant Current: 40A
Peak Current: 50A
BEC Output: NO
Firmware:32bit ESC with BLHELI_32 firmware
Size: 27x27mm (mainboard)
32x34mm (including pad)
Installing Hole:20x20mm,M2
Weight: 5.2g
CPU:STM32F051
MOS Tube: TOP QUALITY MOSFET
Protocol: DSHOT1200/600/300/150, Oneshot125/42, MultiShot, Damped mode, forward and reverse
Package Includes:
1 x HGLRC DinoShot 40AMP 3-5S BLHeli32 4-in-1 ESC
HGLRC 28A – 4 In 1 ESC
HGLRC 28A – 4 In 1 ESC
Specification:
Brand Name: HGLRC
Item Name: 28A BLheli_S BB2 2-4S 4 In 1 ESC
Usage: Original parts for XJB F428/ F328/ F428-TX20/ F328-TX20
Package Includes:
1x 28A 4 In 1 ESC
HGLRC Forward 65A 3-6S L431 BL32 4in1 ESC
Specification:
Brand Name:HGLRC
Item Name: FD65A 4in1 ESC
Input Voltage: 3-6S Lipo
CPU:STM32L431
Firmware:BLHELI32
Steady Current: 65A
Peak Current: 75A
BEC: NO
Supported Protocols: DSHOT1200/600/300/150.ONESHOT125/42.MultiShot
Size: 46*45*6mm
Weight:23.6g
KISS Compact CTRL CC All-in-One
KISS Compact CTRL CC All-in-One
This version of the All-in-One board by Flyduino consists of a KISS 32bit flight controller and 4x 32bit KISS ESCs, rated at 16A (21A active limit), great for mini FPV setups, and perfect for the SuperLight 3 INCH or Merica 3 INCH
It’s made for instant DIY success as you only need to solder motor wires, connect power and a radio and go. The KISS CC should be ideally driven up to 4s and up to 4-inch props. 5-inch props are possible but you need to choose motors carefully. The CC will actively limit the output to 21A.
The CC comes pre-flashed with FC fw v1.1RC6 and ESC16A fw v110a
Specs of the CC
- Weight of PCB: 11g (without wires)
- Size 35x42mm (with cut off corners)
- 4x KISS ESC 32bit ESC’s 2-4S 16A (21A active current limiter)
- KISS FC F3 32bit with serial, buzzer and LED ports.
- Fully Dshot600 capable
The CC supports full telemetry and logging via serial port.
Setup is the same as with the regular KISS FC.
T-Motor F55 PRO II – 4 in 1
T-Motor F55 PRO II – 4 in 1
Specifications
BLHeli_32 32bit
Continuous current: 4 x 55A
Burst current: 4 x 75A
BEC Output: 5V @2.0A
Size: 45mm x 41mm x 7.3mm
Weight: 17.5g (Including Heatsink)
Support DSHOT 150/300/600/1200
Includes
1 x F55A Pro 4 IN 1 Brushless ESC
4 x Damping Rubbers
1 x 12AWG – 130MM with XT60 Soldered input wires
2 x AWG Type-100mm Signal wire
2 x Capacitor
TOOTHPICK FSD412 12A 2-4S ESC (16*16MM)
FullSpeed FSD412 （2-4S ESC）BLHELI_S 4in1 ESC
Size: 20mm x 25mm x 5mm
Mounting hole: 16mm x 16mm
Firmware: BLHELI_S
Input voltage: 1-4S Lipo or 1- 4S HV Lipo
Continuous current: 12A
BEC Ouput: NO
