Complete Frames

This frame is light and compact with removable arms.

Lycan is designed to take a triple electronics stack, either 20x20mm or 30x30mm, and a micro 19x19mm camera.

Included in the Kit

Carbon

4 x 5mm carbon fibre arms

2 x 2mm carbon fibre top chassis plates

1 x 3mm carbon fibre main chassis plate

2 x 3mm carbon fibre side plates (notched to indicate cam angle, 45, 55 and 65 degrees)

Fasteners

5 x 18mm M3 cap bolts

5 x 12mm M3 cap bolts

9 x 8mm M3 button cap bolts (8 for motors)

4 x M3 stainless steel nylon lock nuts

2 x 20mm aluminium standoff

5 x press nuts

Fasteners have been matched up together in separate packets to make it easier to assemble the frame.

Frame Only

Specification:

Item Name: 145mm Carbon Fiber Frame Kit

Model: VX145

Wheelbase: 145mm

Arm Plate Thickness: 3mm

Bottom Plate Thickness: 3mm

Side Plate Thickness: 1.5mm

Material: Carbon Fiber

Weight: 29g

Recommend Parts: (Not included in the package)

Flight Control & ESC: 20x20mm FC & ESC Flytower

Motor: 1407 Motor

VTX & Camera: FPV Transmitter AIO Camera Module

Propeller: Not bigger than 3 Inch

Frame Only

The new Lumenier carbon fiber QAV210 CHARPU mini FPV quadcopter. A rigid, light, and fast FPV racer and acrobat.

The QAV210 Carpu is designed to be the smallest possible airframe while comfortably supporting 5″ props and 220X size motors. The assembled kit containing Carbon Fiber Plates, Power Distribution Board and all hardware weighs in at only 91g.

Features:

Full 3K Carbon Fiber airframe featuring a solid 3mm thick “Unibody” main plate.

Multiple motor mounting holes to fit a variety of motors (M3 and M2 screw mounting patterns).

“Bumpers” on the end of the arms to protect the motor during a crash, just like the QAV250.

Flight controller cover plate includes cutouts for SMA connector and video transmitter as well as a holder for the included XT-60 Lipo pig-tail.

Included Lumenier 4Power power distribution board and XT-60 Pig-Tail to power ESCs and FPV flight electronics. The PDB can optionally be outfitted with a Pololu 12v or 5v voltage step-down (Pololu board not included).

Easy Lipo Access (suggested Lipo is a 1300mah 3 or 4s)

Support for 32mm board cams as well as 26mm cams in cases such as the Lumenier CM-650.

Support to carry HD camera (such as the GoPro 4, Mobius, or GoPro Session) with optional camera vibration mount (not included)

Included Landing Gear

Weight:

Airframe: 91g (with PDB and hardware), 96g with included Landing Gear.

AUW: The QAV210 is flown with an AUW of 256-281g depending on motor choice (includes all flight electronics and FPV gear but without Lipo or HD camera).

Frame Only – Canopy Sold Separately 

Dry frame weight with all included fasteners and canopy comes to only 62g.

THIS IS A GOOD LOW KV – HV FRAME

The ‘Merica was born directly from customer feedback and our own internal race pilot testing and requests. We actually listen to pilot feedback and implement some of those ideas into our designs. This machine has some very unique and innovative pilot inspired features built in.

Low aerodynamic drag:

This frame uses an aerodynamically efficient arm design that is thin without sacrificing crash durability. Standard with the kit are 5mm thick arms and optional 6mm thick arms can be purchased as an upgrade. Arm design is not the only contributing factor for great aero. You also need a ‘slippery’ center fuselage that gives as little resistance to the oncoming air as possible. Merica’s ‘head’ is a TPU canopy that is designed to have a very low drag coefficient.

Build in flight controller/camera soft mount:

The flight controller and FPV camera are mounted to the TPU canopy. You read that correctly. The FC is NOT mounted to the carbon fiber frame. Mounting the FC to the TPU canopy means that any board you choose is soft mounted by default. The canopy is made of a flexible material and works to de-couple the board from the motors. The FPV camera is mounted at the top of the canopy. This mounting scenario helps to dampen vibration before it reaches your camera.

Ample space to fit standard sized components:

Plenty of space to fit ‘standard sized’ components with 30.5mm x 30.5mm mounting holes. 4-in-1 ESC’s are ideal with this frame. AIO FC/ESC/PDB’s such as the Asgard can be used as well. There are also 20mm x 20mm mounting holes for micro AIO ESC’s, and with THIS adapter you can mount in a micro FC.

Excellent crash durability:

The Merica comes standard with high-quality 5mm thick arms with optional 6mm thick arms available for purchase. Carbon fiber grain direction is aligned with the length of the arm for maximum crash toughness and rigidity. The entire top section of the frame is a flexible TPU canopy. During a crash, this structure will move and give instead of breaking like a carbon fiber top plate.

Clean air for the rear props:

This frame takes the stretch X design even farther and staggers the front and rear arms with respect to each other. The front arms sit at a lower elevation than the rear which helps to get more ‘clean air’ to the rear props.

Specifications:

62 grams (fasteners and canopy included)

Carbon Fiber: Twill Weave 3K Matte

Canopy Material: TPU (multiple colors available)

Standard CF Arm Thickness: 5mm

Optional CF Arm Thickness: 6mm (sold separately)

Top CF Sandwich Plate: 3mm

Bottom CF Sandwich Plate: 2mm

Frame Type: XL (with staggered arms front to rear)

Frame Size: 200mm

Camera Angle Range: 10 – 75 degrees

Motors supported: 2306, 2205, 2204, 1806, 1807 and similar

Lipos supported: 3s, 4s, 5s, 6s

Lipo mounting position: Bottom

Prop Size: 5 inch

Fastener Material: Aircraft Grade 7075

Fastener Color: Black

Ideal ESC: 4-in-1 design with 30.5mm x 30.5mm M3 mounting holes

Ideal FC: 30.5mm x 30.5mm M3 mounting holes (micro FC can be used with THIS adapter)

Motor pad mounting holes: M3 screws on 16mm or 12mm mounting circles

Supported FPV Cameras: Runcam Swift Micro or Foxeer Arrow Micro

Two versions are available. The only difference between the two is the standoff length. The SuperSlamNasty is for builders who prefer a very slammed deck (20mm of room from the bottom to top plate). The SlamNasty is a more standard type build with plenty of room for tall stacks (26mm of room from the bottom to top plate)

WE HAVE THE SLAMNASTY IN STOCK – 26MM OF ROOM – IF YOU WANT TO GET TO 20MM – YOU NEED TO PURCHASE A SET OF 13MM STANDOFFS

Specs:

• (SlamNasty = 26.5mm working space top to bottom plate)
• (SuperSlamNasty = 20mm working space top to bottom plate)
• 65 grams (SlamNasty)
• 64 grams (SuperSlamNasty)
• True X frame layout
• Frame Size: 207mm
• Carbon Fiber: Twill Weave 3K Matte
• CF arm thickness: 5mm
• CF bottom plate thickness: 3mm
• CF top plate thickness: 2.5mm
• CF front cross brace plate thickness: 2.5mm
• CF rear cross brace plate thickness: 2.5mm
• CF front arm brace: 4mm (sold separate)
• CF rear arm brace: 4mm (sold separate)
• Camera Angle Range: 0 – 65 degrees
• Motors supported: 22xx, 23xx, 24xx or similar
• Lipos supported: 3s, 4s, 5s, 6s
• Lipo mounting position: Bottom
• Prop Size: Up to 5.1″
• Fastener Material: High quality steel
• Accepted ESC: (30.5mm x 30.5mm or micro 20mm x 20mm)
• Motor pad mounting holes: M3 screws on 16mm or 19mm mounting circles
• Supported FPV Cameras: Micro Camera

Frame Only

This freestyle rig is special and so different than anything else on the market. Another world class rig from Catalyst Machineworks.After designing some of the most innovative racing frames the FPV market has ever seen we are now set on a course for freestyle nirvana.

Specifications and Features:

125 grams (with 3D plastic parts and fasteners, no GoPro mount, no rear brace)

Carbon fiber: Twill Weave 3K Matte

HD camera mount material: TPU (multiple colors available – sold separately)

Standard CF Arm Thickness: 5mm thick x 10mm wide

Top CF sandwich plates: 2mm

Bottom CF sandwich plate: 3mm

Frame type: H (with staggered arms front to rear)

Frame size: 225mm

FPV camera angle range: 0 – 75 degrees

Motors supported: 22xx, 23xx, 24xx or similar

Lipos supported: 3s, 4s, 5s, 6s

Lipo mounting position: Top

Prop size: 5 inch

Fastener material: Aircraft Grade 7075 and steel

Fastener color: Black

Ideal ESC: 4-in-1 design with 30.5mm x 30.5mm M3 mounting holes

Ideal FC: 30.5mm x 30.5mm M3 mounting holes (micro FC can be used with THIS adapter)

Motor pad mounting holes: M3 screws on 16mm or 12mm mounting circles

Supported FPV Cameras: ANY micro camera with 19mm x 19mm form factor, no seriously any of them will fit.

HD camera mount options: Session or Standard Gopro

HD camera mount angle range: 20 – 50 degrees

Electronic component access: Lower cover plate can be removed

Electronic component access: Top plate is split to allow access to FC, VTX, FPV antenna, etc

Slammed deck (13mm tall)

ESC center mounted with FC behind it (YES the FC can be mounted there)

Two screw arm removal. Remove arms be loosening one screw and removing the other

Industry-leading camera protection (FPV and HD)

Provisions for nearly any FPV antenna on the market

Provisions for crossfire gear

Large lipo’s fit with ease