Whoop Accessories
BETA 2S Whoop Cable Pigtail (BT2.0) – EACH
Specifications
- Item: 2S Whoop Cable Pigtail (BT 2.0)
- Connector : BT2.0
- Cable: 22AWG
- Length: 55mm (Not including the plug)
- Weight: 1.5g
- Note: Blue represents positive pole (+); White represents negative pole(-)
BETA 2S Whoop Cable Pigtail (XT30) – EACH
Specifications:
Connector: Male XT30 power cables
Length: 55mm (Not included the plug)
BETA 31mm 3-blade Whoop Propellers (1.0mm Shaft Hole) (4pcs)
Specification
- Item: 31mm 3-blade Props
- Blades: 3
- Material: PC (Poly Carbonates)
- Center Thickness: 5mm
- Prop Disk Diameter: 31mm
- Mounting hole: 1.0mm shaft
- Max Prop Width: 5.71mm
- Weight (2CW+2CCW): 1g
BETA Accessories for Flight Controller
Package
- 20 * M1.2* 4 screws
- 20 * M1.4* 5 screws
- 20 * Black ruber dampers
- 20 * White ruber dampers
- 20 * Blue ruber dampers
BETA BT2.0 Connectors (10pcs) – 5 x female & 5 x male
SPECIFICATION
- Size: Male Connector – 6.0*4.2*10.5mm / Female Connector – 6.0*4.2*8.3mm
- Weight: Male Connector- 0.34g/PCS / Female Connector – 0.24g/PCS
- Note: The terminal molded case identifies the positive and negative poles, and must be welded according to the instructions.
Beta C01 Pro FPV Micro Camera 4:3
Specification
- Image Sensor: 1/3″ CMOS Sensor
- Horizontal: 1200TVL with Global WDR
- Signal System: NTSC
- Lens : 2.1mm(M8) FOV 160°
- S/N Ratio: >50db
- Electronic Shutter Speed: Auto
- Auto Gain Control (AGC): Auto
- Min. Illumination: 0.01Lux@1.2F
- D-WDR: Auto
- Day/Night: Color
- Power: DC 3.3-6V
- Current: 110mA@6V / 120mA@3.3V
- Housing Material: ABS
- Dimension: 12.1*14.5mm
- Net weight: 1.96g
The C01 Pro Micro Camera is a rare FPV camera currently on the market, which adapted a 1/3” CMOS sensor and a 2.1mm lens for 1200TVL resolution and excellent latency while minimizing the weight to 1.96g. Designed specifically for those weight-sensitive drones, such as Brushed & Brushless Whoop Quad.
BETA Flame Canopy
BETA M01 AIO Camera 5.8G VTX V2 (Pin-Connected)
M01 AIO Camera 5.8G VTX V2.1 is upgraded into a pin-connected version, easy to connected with the camera. With the ultra-lightweight 2.72g, it comes with a super Mini 5.8GHz FPV Transmitter, 800TVL FPV Camera and RG178 Antenna, features 6 bands and 37 channels on the 5.8GHz band with Raceband which is perfect for Pro Series and Brushed Whoop Drone.
Specification
- Item: M01 Camera AIO VTX V2.1
- TVL: 600TVL
- FOV: H:120°/V:100°
- Video System: NTSC
- Horizontal Resolution: 640X480 1/4”
- Output power: 25mW
- Supply Voltage: 5V
- Size: 18*14*4.5mm(VTX)
- Weight: 2.72g
- Antenna: RG178 Antenna
- Frequency: 5.8GHz 6 bands 37 channels, with Raceband: 5362~5945MHz
BETA M2 Clamping Nuts – EACH
The ONLY M2 clamping nuts in the world. Those nuts are accessories for X-Knight Frame Kit.
Specification
- Material: High carbon steel
- Colour: Black
- Weight: 0.07g/pc
- Minimum thickness of the mounting plate: 1.5mm
- Suitable mounting hole: φ3.05mm – φ3.10mm
- Application: X-Knight Frame Kit / X-Knight 4” Quad
BETAFPV 1S BT2.0 Charger Board with Wall Adapter
Compact, versatile and powerful, the battery chargers board is among the most popular pilots’ common tools. This charger board is customized for BT2.0 connector battery, while it is safely and easily charging packs.
Bullet Point
- Allow charging 6pcs BT2.0 Connector batteries at the same time, Individual charging per ports, not parallel
- You could also use XT60 adapter or 3s/4s battery(XT60 Input) as supply power so you can continuously charge
- Turns itself off when supply battery reaches safe low-voltage. 2 channels BEC for supply current
- LED lights indicate when each battery is done charging
BETAFPV Lipo Strap Kit for 2-4S battery
Package
- 3* 10x115mm 2-3S Battery Strap
- 3* 10x150mm 3-4S Battery Strap
- 6* No-Slip Rubber Pads
BT2.0 1S Whoop Cable Pigtail (6pcs)
BT2.0 Connector – the most significant revolution in 1S Tiny Whoop Drone.
EMAX 2035 4-blade Whoop Propellers (1.5mm Shaft Hole) (4pcs) Blue
SPECIFICATION
- Product material: Clear Plastic
- Color: Transparent / blue
- Inner diameter: 1.5mm Shaft
- Size: 2 inch
- Weight: 3.7g(4pcs)
- Recommended Motor: 1105 6000KV Motors
GEMFAN D63 Ducted Durable 5 Blade 1.5mm
4 Pairs
HAVE CLEAR GREY AND YELLOW IN STOCK- Add colour to comments on order
GEMFAN Drawstring Bag-Orange
MINI CANOPY V3 – BLACK
MINI CANOPY V3 – BLACK
Currently, both MINI V2 and MINI V3 canopies suit for Beta95X, Beta85X, Beta75X and Beta75 pro 2 frame. MINI V3 canopy is suitable for all mini cameras which are the 19*19mm or 20*20mm FPV cameras, like Caddx Vista or DJI FPV unit camera, Caddx Turtle V2, RunCam Racer 3.
ALSO FITS THE X-KNIGHT 5 INCH TOOTHPIOCK
