Whoop Electronics
BETA 1105-5000KV Brushless Motors (4PCS) for Beta 85X
SPECIFICATION
- Height: 14mm
- Weight: about 5.2g (1 pc)
- Shaft: φ1.5mm
- Motor Mount Holes: M2.0 on Dia 9.0mm
- KV (rpm/V): 5000 – UP TO 4S
- Plug and cables:
- Micro JST-1.25 3-pin connector with 28AWG cables (5000KV)
BETA 1106 4500KV Brushless Motors（4pcs）
Rated at 4500KV / 5000KV, 1106 Brushless Motor hits the sweet spot for high-powered 4s power.
SPECIFICATION
- Height: 14mm
- Weight: 6.6g (1 pcs)
- Shaft: φ1.5mm
- Motor Mount Holes: M2EQS on Dia 5.0mm
- KV (rpm/V): 4500KV
Beta C01 Pro FPV Micro Camera 4:3
Specification
- Image Sensor: 1/3″ CMOS Sensor
- Horizontal: 1200TVL with Global WDR
- Signal System: NTSC
- Lens : 2.1mm(M8) FOV 160°
- S/N Ratio: >50db
- Electronic Shutter Speed: Auto
- Auto Gain Control (AGC): Auto
- Min. Illumination: 0.01Lux@1.2F
- D-WDR: Auto
- Day/Night: Color
- Power: DC 3.3-6V
- Current: 110mA@6V / 120mA@3.3V
- Housing Material: ABS
- Dimension: 12.1*14.5mm
- Net weight: 1.96g
The C01 Pro Micro Camera is a rare FPV camera currently on the market, which adapted a 1/3” CMOS sensor and a 2.1mm lens for 1200TVL resolution and excellent latency while minimizing the weight to 1.96g. Designed specifically for those weight-sensitive drones, such as Brushed & Brushless Whoop Quad.
BETA F4 1S Brushless Flight Controller (Frsky) V2.2
This is the lightest F4 1S brushless FC in the current market. Upgraded to V2.2, we have optimized the design of power supply for a stable flying experience. With BT2.0 connector, slim and sleek design, 2.69g in weight and better performance on function for maximum weight savings, power, and responsiveness.
SPECIFICATIONS OF FC
- CPU: STM32F411CEU6 ( 100MHZ )
- Six-Axis: MPU-6000 triaxial accelerometer / triaxial gyroscope (SPI connection)
- Size: 29mm x 29mm, fully compatible with the whoop frame in the current market, Beta65 Pro frame, Beta75 Pro frame, BWhoop B06 frame, and mounting pattern
- Firmware version: Frsky / Futaba: Betaflight MATEKF411RX (MK41R) , DSMX: BETAFPVF411
- Compatible with Z02, A01, M01 VTX
- OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
- Power Cable: 55mm, with BT2.0 connector
- Weight: 2.69g
SPECIFICATIONS OF ESC
- Power supply: 1S
- Current: 5A continuous and peak 6A (3 seconds)
- Support BLHeliSuite programmable
- Factory firmware: O_H_5_REV16_6.HEX
- Signal Support: D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM
BETA F4 2S Brushless Flight Controller – V2 FOR WHOOP
F4 AIO FC 12A V2 is upgraded in these 2 spark points.
- Add 8M Flash chip for Betaflight Black Box.
- 3 full UARTs (UART1, UART2 and UART6) are available. Pilots could use one UART for DJI digital FPV unit or Caddx Vista digital FPV unit and the other UART for external receiver like TBS Crossfire.
SPECIFICATIONS OF FC
- CPU: STM32F411CEU6 (100MHZ )
- Six-Axis: MPU6000 (SPI connection)
- Size: 26mm x 26mm, whoop mounting pattern
- Firmware version: BETAFPVF411 (BEFH)
- OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
- Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/ Flysky Receiver/ TBS Crossfire Receiver. Add Frsky R9M Receiver and BETAFPV Micro DSMX Receiver (Don’t support DSMX RX with 3.3V solder pad ) since V1.2.
- Support programmable LED like WS2812 etc
- Built-in current sensor
- Weight: 5.07g
SPECIFICATIONS OF ESC
- Support BLheli/BLHELI_S suite Pass-through ready
- Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
- Input voltage: 2S-4S Lipo
- Continue current: 12A
- Peak current: 13A
- Firmware: BLHELI_S
- Processor: SILABS EFM8BB21F16G
- Motor Connectors: 1.25mm header pins connector
- Factory firmware: G-H-30-16.7
BETA F4 V2 4S Brushless Flight Controller and ESC (BLHeli_32) 16A
After several months of research, the greatest combination of F405 4S Brushless Flight Controller with BLHeli_32 16A ESC has been released which totally supports 4S power with a steady performance. BLHeli_32 16A ESC is customized for Beta85X whoop drone. Meanwhile, Beta85X is the first micro drone with a BLHeli_32 ESC at present.
SPECIFICATIONS OF FC
- CPU: STM32F405 (Overclock to 240MHz)
- Six-Axis: MPU6000
- Size: 26mm x 26mm, whoop mounting pattern
- Firmware version: BETAFPVF405 (BEFH)
- OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
- RX3 and TX3 are with auto inverter, supporting all RX including TBS Micro RX
- TX01 and RX01 ports are available for Frsky F-Port, DSM2/DSMX
- Buzzer solder pads
- Support programable LED like WS2812 etc
- Weight: 4.2g
SPECIFICATIONS OF ESC
- Support BLHELI_32
- Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
- Input voltage: 3-4S lipo
- Cotinue current: 16A
- Peak current: 19A
- Firmware target: BETAFPV-16A-32bit
- MCU: STM32F051K66
- Motor Connectors: 1.25mm header pins connector
- Weight: 4.4g (7.7g with XT30 cable)
BETA FPV – 1103 11000KV Brushless Motors – 4 PCS
Lightest 1103 motors in the world. Only 3.2g with connector. This motor fits the Beta75X 2S Whoop drone. A 1.5mm header pins connector is included. So no soldering needed, just plug and play.
Info:
1103 11000KV brushless motors are customed for 2S brushless whoop drone.
Fit with 1735, 1935, 2030, 3020 propellers
Shaft Diameter: 1.5mm, Weight: 3.2g
Compatible with 2S lipo battery
Recommended Parts:
Propellers: 40mm 4-blade props (1.5mm shaft hole)
Frame: Beta75X frame
FC & ESC: BETAFPV 2S Whoop FC cube
Specification:
Height: 14mm
Weight: about 3.2g
Shaft: φ1.5mm
Motor Mount Holes: M1.6 on Dia 8.5mm
KV (rpm/V): 11000
Voltage: 7.4V, 2S Lipo battery
Plug: Micro JST-1.25 3-pins connector
BETA FPV 1103 8000KV Motors – 4PCS
Lightest 1103 motors in the world – 8000KV- specially made for Beta75X 3S, also suitable for most 3S whoop on the market, provide you with much more thrust.
A header pins connector is included. So no soldering needed, just plug and play.
Specification
- Height: 14mm
- Weight: about 3.8g (8000KV)
- Shaft: φ1.5mm
- Motor Mount Holes: M1.6 on Dia 8.5mm
- KV (rpm/V): 8000
- Plug: Micro JST-1.25 3-pins connector
BETA M01 AIO Camera 5.8G VTX – Pin-Connected Version
M01 AIO Camera 5.8G VTX comes with a super Mini 5.8GHz FPV Transmitter + 600TVL FPV Camera + RG178 Antenna, features 6 bands and 48 channels on the 5.8GHz band with Raceband. The unit is ultra-lightweight only 3g and pins connect with FC
SPECIFICATION
- Item: M01 Camera AIO VTX
- TVL: 600TVL
- FOV: H:120°/V:100°
- Video System: NTSC
- Horizontal Resolution: 640X480 1/4”
- Output power: 25mW
- Supply Voltage: 5V
- Size: 18*14*4.5mm(VTX)
- Weight: 3g
- Antenna: RG178 Antenna
- Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
BETA PFV Customized EOS2 FPV Camera NTSC
Feature
- Smallest D-WDR FPV camera: A scaled-down version of Turbo S1/F1.
- High Definition Display: This fpv camera is with 1200TVL definition and 160-degree wide field of vision. High-quality video, low RF interference. It will give you good images during day and night.
- Application: Perfect for FPV flying, excellent FPV camera for the race.
Specification
- Image Sensor: 1/3″ CMOS Sensor
- Horizontal: 1200TVL with Global WDR
- TV system: NTSC, non-changeable
- Power Input: 3.3-9V
- Mini Illumination: 0.001lux
- Dimension: 14*14*16mm
- Net weight: 3.5g
- Lens: 2.1mm
- Colour: Black
- Aspect Ratio: 16:9 or 4:3 (non-changeable) – BOTH IN STOCK
- With Amounting Hole
Caddx Ant Nano Cam 1200TVL
Caddx Ant Nano Cam 1200TVL
Caddx Ant 1200TVL Global WDR with OSD 2g Ultra Light Nano FPV Camera
Specification
| Model | Caddx Ant |
| Image Sensor | 1/3″ CMOS Sensor |
| Horizontal Resolution | 1200 TVL |
| TV System | NTSC or PAL |
| MENU | Support |
| IMAGE | 4:3 |
| Synchronization | Internal |
| Electronic Shutter | PAL: 1/50~100,000; NTSC: 1/60~100,000 |
| S/N Ratio | >52dB (AGC OFF) |
| Video Output | CVBS |
| Lens | 1.8mm |
| Min. Illumination | 0.001Lux@F1.2 |
| Auto Gain Control | YES |
| BLC | YES |
| WDR | Global WDR |
| DNR | 3D DNR |
| Dimensions | 14*14mm(with bracket to 19*19mm) |
| Wide Power Input | DC 3.7-18V |
| Work Temperature | -20℃~+60℃ |
| Work Humidity | 20%~80% |
| Weight | 2g (N.W.) |
|
Packing List
|
Camera x1
3pin FPV silicone cable x1 Warranty card x1 Expend bracket x1 Screws x 4 |
Caddx Micro F2 camera
Caddx Micro F2 camera
Specifications
- Image Sensor: 1/3″ CMOS Sensor
- Horizontal Resolution: 1200 TVL
- TV System: NTSC/PAL changeable
- Aspect Ratio: 16:9
- Synchronization: Internal
- Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
- S/N Ratio: >52dB (AGC OFF)
- Video Output: CVBS
- Lens: 2.1mm
- Min. Illumination: 0.005Lux@F1.2
- Auto Gain Control: YES
- BLC: YES
- Camera OSD: YES
- Voltage OSD: NO
- WDR: D-WDR
- DNR: 2 DNR
- Day/Night: Auto/Color/B&W
- Dimensions: 19mm*19mm*19mm
- Wide Power Input: DC 4.5-40V
- Work Temperature: -20℃~+60℃
- Work Humidity: 20%~80%
- Weight: 5.5g (N.W.)
HGLRC FD1103 8000KV Brushless Motor
HGLRC Forward FD1103 8000KV Brushless Motor
Brand name: HGLRC
Item name: FD1103 8000KV Brushless Motor
Motor:KV8000
Stator Diameter:11mm
Stator Thickness:3mm
No.of Stator Arms:9S
No.of Rotor poles:12P
Motor Resistance:330mΩ
Max Continuous Current:5.46A
No.of Cells(Lipo):2-3S
ESC:6A
Recommended Prop(inch):2.5 Inch
Wire type:28AWG x 40mm
Weight:4g
Micro AIO Camera 5.8G 40CH 25mW VTX – CANOPY NOT INCLUDED
Specifications:
Model：5.8G 25mW 40 Channels RF Camera
Video Format：NTSC / PAL
Image sensor：1/4″ CMOS Image sensor
Resolution Lines ：800TVL
Out Frequency：5645-5945MHz
Operating Current：450mA
Operating Temperature： -20-85℃
Out Power：12-14dBm
Operating Voltage：3-5.5V
weight：3.6g
Size：15 X 16 X 18mm (Not included Antenna)
Antenna：5.8GHz Band Circular Polarization
FOV：150°Horizontal
NO CANOPY INCLUDED
Mobula – 19000kv brushless motor – 4 Motors
19000kv brushless motor
Brand name: Happymodel
Item name: SE0802 1-2S brushless motor
KV: 19000KV
Shaft Diameter: 1.0mm
Configuration: 9N12P
Stator Diameter: 8mm
Stator Length: 2mm
Motor Dimension(Dia.*Len): Φ10.5mm*14.9mm
Terminals: JST1.25mm
No.of Cells(Lipo): 1-2S
Wire length(include connector): 40mm
Weight: 1.9g
Features:
Super tiny only 1.9g
Double E-clip design, prevent Motor bell to flying off
Good Dynamic balance
SE0802 16000kv brushless motor – 4 Motors
Specifications
- KV: 16000KV
- Shaft Diameter: 1.0mm
- Configuration: 9N12P
- Stator Diameter: 8mm
- Stator Length: 2mm
- Motor Dimension(Dia.*Len): Φ10.5mm*14.9mm
- Terminals: JST1.25mm
- No.of Cells(Lipo): 1-2S
- Wire length(include connector): 40mm
- Weight: 1.9g
Includes
- 2x CW Motors
- 2x CCW Motors
- 1x Screw Set
